Kapanadze process?

  • 880 Views
  • Last Post 28 February 2018
anothercat posted this 26 February 2018

Hi everyone,

I would like you to have a look at this:

https://goo.gl/ku4Hdn - Go directly to the "Explanation of Drawings" section who is in relation with the figure no.1 

 

This page has been brought to some energy forums (not by me but by other users) in the past without too much interest....So I decided to republish it here. I don't know the author and to be honest I'm not a fan of using words like "virtual photons". This said, the idea behind this concept is exactly what I have in mind for the last year!

 

Basically, the idea goes like this:

Bringing 2 independents signals (One with high current low voltage and one with high voltage low current) of same frequency (and phase coherent)  together and harvesting the wattage out (volts x amps) with an isolation transformer. It's so simple it's sounds almost ridiculous! And the beauty of this is that you can generate both input signals (amps and volts) with really low power.

Too good to be true? What do you think?

  • Liked by
  • Wistiti
  • Zanzal
Order By: Standard | Newest | Votes
anothercat posted this 26 February 2018

Hello Chris,

You are right that doing no test on the bench do not help. I still have a lab with signal generators, oscilloscope, dozens of reclaimed coils, transistors, mosfets, etc...but I'm self learned...And to be honest, after more than 5 years of prototypes tests + regular duties (kids, work, etc...), I now take my time when it comes to jump on the bench again....

Also, I don't have the habit of posting new threads on forums. First, because my english is average and second because way of seeing things is always changing so I usually stay quiet. But for this one, it's different. What was my surprise to find someone who elaborates on the same exact idea that I'm playing on paper with for the last year!

Concerning Kapanadze CW and CCW, I don't think the POT concept apply here. Basically we don't need it.

So, for someone who is more knowledgeable than me with electric/electronic, Chris, can you please answer me on this specific question:

Is it possible to mix 2 signals (same frequency and phase coherent) and ending up with a unified signal ? 

Thanks for your patience with people on this forum

Chris posted this 26 February 2018

Hi Anothercat - I always say, experiment on the bench, you can learn more from very simple experiments than in any diagram or text.

I think there is a starting basis there, it may lead to good things.

Re Kapanadze - How many turns CW and how many turns CCW? Why?

   Chris

  • Liked by
  • Wistiti
  • Zanzal
Wistiti posted this 27 February 2018

Hi anothercat!
First, thank you for sharing. I find the idea really interesting! I also want to say don’t worry for starting or reply on a tread, your English is way much better then mine!

With that said, I’m thinking like Chris, the best way to know it or learn about it is “on the bench” for now I’m on other idea but I like the concept you bring! I may give it a try.  If you decide to experiment with it, please share your discovery!

Sincerly!

  • Liked by
  • Chris
  • Zanzal
anothercat posted this 27 February 2018

Alright then. I didn't wanted to embarrass myself with this but here we go.

 

I already started some tests a couple of days ago but again my lack of electronic knowledge makes things complicated.

First, I need to make a variable frequency amplified sinewave. So I thought that using an audio amplifier would do the trick.

So I bought two (I need a total of 2 signals) of this model on ebay: https://goo.gl/a5R6LA

So here is the way it has been plugged:

So I plugged my signal generator (with the red and green of the audio jack), plugged 12v PSU on the VCC+ and GND and tried both OUT R and OUT L channels on my oscilloscope.....The only thing that I could see was small parasitic noise of some mV (so no output). 

Can anybody points me were I was wrong?

 

 

 

  • Liked by
  • Chris
anothercat posted this 27 February 2018

Hey Chris,

Concerning the grenade coil, I think that Ruslan,Akula, Kapanadze etc. use it with the same principle of a Tesla bifilar pancake coil: Either magnetic/capacity enhancement (same turns direction) or cancelation (opposite direction-a bit like partnered coil). And the grenade coil is a mix of these 2 effects.

Now, concerning your last observation about mixing two signals...If we do not take resonance in consideration, I’m not sure why my 2 signals should have impedance matching. I mean having frequency and phase matching will not be enough?

Cheers!

  • Liked by
  • Chris
Chris posted this 27 February 2018

Hey Anothercat - my friend, there is no such thing - The only silly question is the question not asked.

We are all one great team and will always do the best we can to help each other out, and your English is very good! I understand perfectly well.

Re mixing two signals, yes, there are pit falls to watch for. Zanzal has recently shown a fantastic circuit to do this: Pulse Train Circuit

In Radio, AM is Amplitude Modulation, FM is Frequency Modulation  -This is the mixing of signals to create Wave that a Radio can use and sort. 

Note: my Electronics skills are only average, I know enough to get by most of the time.

Re POC, Partnered Output Coils, Kapanadze uses approximately 1/3 CCW to 2/3 CW winding ratio:

 

Ruslan's replica:

The Coils must be in Resonance, we know why from The Mr Preva Experiment, also from Floyd Sweet. Energy begets Energy, meaning the very action of Pumping creates more Pumping and all we need to concentrate on is Pumping Electrons - An Electron Accelerator.

What moves Electrons? A Magnetic Changing in Time. But the Magnetic Field direction must oppose.

   Chris

Chris posted this 27 February 2018

Hi Anothercat - Are your output channels good by themselves? You get Frequency and Amplitude on each channel?

Perhaps a small transformer with two input Coils, from your source and one output Coil, this should have the complete mixed signal. Of course your Coils will need to be impedance matched.

You may have trouble with reverse currents back into your source. How to stop this - Tricky, I need to think more. perhaps a High-Pass and a Low-Pass filter combination...

I also am self taught, like I said, I know enough to get by most of the time.

   Chris

Chris posted this 28 February 2018

Hey Anothercat - Sorry, I meant Impedance matching the Output Impedance on your PCB with the Coils on a Transformer. 

All Electrons are inherently Magnetic, because they have Charge, they have a Magnetic Moment associated.

Because this is the case, the Magnetic Field can do work on the Electron. Forcing it to move!

This a "Generator" works, because Electrons are inherently Magnetic.

   Chris

We're Light Years Ahead!
Our Above Unity Machines:

Asymmetrical EMI

Wistiti's Bucking Joule Thief
Non-Inductive Coil Experiment
CD's Non-Inductive Coil Rep
Baerndorfer's Experiment
Captainloz's A-R-E
Aetherholic's COP>4.0

Resonant EMI

Yo's Ferro Resonance
Jagau's Non-linear Resonance
Ferrite at work
Recomended Protocol:
Measurement
Switching System
Measurement Block
Current Observation
Current Sensing Resolution
Members Online:
What is a Scalar:

In physics, scalars are physical quantities that are unaffected by changes to a vector space basis. Scalars are often accompanied by units of measurement, as in "10 cm". Examples of scalar quantities are mass, distance, charge, volume, time, speed, and the magnitude of physical vectors in general.

You need to forget the Non-Sense that some spout with out knowing the actual Definition of the word Scalar! Some people talk absolute Bull Sh*t!

The pressure P in the formula P = pgh, pgh is a scalar that tells you the amount of this squashing force per unit area in a fluid.

A Scalar, having both direction and magnitude, can be anything! The Magnetic Field, a Charge moving, yet some Numb Nuts think it means Magic Science!

Start Here:
Help with using the Forum.
Message from God:

Hello my children. This is Yahweh, the one true Lord. You have found creation's secret. Now share it peacefully with the world.

Ref: Message from God written inside the Human Genome

God be in my head, and in my thinking.

God be in my eyes, and in my looking.

God be in my mouth, and in my speaking.

Oh, God be in my heart, and in my understanding.

Your Support:

More than anything else, your contributions to this forum are most important! We are trying to actively get all visitors involved, but we do only have a few main contributors, which are very much appreciated! If you would like to see more pages with more detailed experiments and answers, perhaps a contribution of another type maybe possible:

PayPal De-Platformed me!

They REFUSE to tell me why!

We now use Wise!

Donate
Use E-Mail: Chris at aboveunity.com

The content I am sharing is not only unique, but is changing the world as we know it! Please Support Us!

Thank You So Much!

Browse by Category:
Weeks High Earners:
The great Nikola Tesla:

Ere many generations pass, our machinery will be driven by a power obtainable at any point of the universe. This idea is not novel. Men have been led to it long ago by instinct or reason. It has been expressed in many ways, and in many places, in the history of old and new. We find it in the delightful myth of Antheus, who drives power from the earth; we find it among the subtle speculations of one of your splendid mathematicians, and in many hints and statements of thinkers of the present time. Throughout space there is energy. Is this energy static or kinetic? If static, our hopes are in vain; if kinetic - and this we know it is for certain - then it is a mere question of time when men will succeed in attaching their machinery to the very wheelwork of nature.

Experiments With Alternate Currents Of High Potential And High Frequency (February 1892).

Close