Meet and Greet Discussions

Welcome to All Members

2017-05-05T06:35:09.6770000

I would like to extend a warm welcome to All Members!

This thread is the idea of Pat1 so I would like to thank Pat1 for this excellent idea! I have moved Pat1's first post here on the suggestion.

Welcome Every Body!

Chris

Hi from Melbourne AU

2024-07-01T08:32:32.2130000

Hi all, I'm here to learn more about coils and resonance as I continue to build my pulse motor.

https://youtu.be/bJVAt0ztUNE?si=9AW8RjIy6GKh9wMz

I am currently trying to work out which direction to go with this, as both top and bottom sets of coils are wired in sets of three, and shorting the top generator coil sets has it spinning 10% faster. Bottom coil sets are alternatively pulsed, with ~40VAC emf back from each FET switch. So tonnes of volts and bugger all current, but I know the potential is there. Forgetting that it's a pulse motor for a minute, what do I do to get more current out of this?

Hello everyone.

2024-04-01T03:10:10.6900000

Hello, lovers of eternal motion. My English may not be understandable because I use Google translator to a large extent , so please be understanding. I have been following the forum since October 2023. I am shocked by the amount of work the administrator of this website has done.
A big shout out to you, Chris.
Thank you for sharing your knowledge substantively. How well can you explain the principles of the formation of standing waves using the example of waves in the ocean. I love such substantive explanations.
Thank you for opening my eyes, as I probably do for many people on this forum.
Thanks to you, I returned to my experiences and I will not hesitate to share them.
You turned my world upside down, positively of course

Once again, hello and best regards to everyone.
Grzegorz.

Hello there!

2024-01-11T04:00:54.4370000

Hi, I am a FE lover since like more than 25 years ago, a friend of mine is in this forum, we want to work on the asymmetric coil stuff.

Since around 2000 when I saw the Steven Mark TPU and the MEG, I wanted to replicate it but did not have much of the experience etc.. to replicate it but

now, since I learned the asymmetric coil and all the read I have done about patent related to this fields, I think i know how the TPU work, it is all related

to the asymmetric coil, Tesla have a patent similar but they are not talking about any asymmetric coil apart Tom Bearden but it is not in the MEG patent. At the end TPU is a MEG with a different configuration.

At first, my objective is to understand how to make the asymmetric coil, with the help of (AETHERIC MIND). I will do a program with a raspberry pi pico with a touch screen to be able to configure the PWM (3 differents one maybe more, one for input, 2 to control the output coil (bifilliar coil, control the 90 offset stuff).

So we will be able to change all the settings from it without the need of external func generator for the input and use it to control the output coil behavior.

Once the basic will work, I would like to make my TPU and make it using 3d printer for the core using magnetite (no glue just 100% magnetite), all the plan will be available when I will be able to make it using the raspberry pi pico as well and share the program... also I plan to use another thing to capture the BEMF from Thane Hein's, meaning just making the core bigger with more rings with more output cores (those bemf output are just normal coil).

Anyway thank you for accepting me, have a nice day!

New member from Melbourne AU

2024-01-09T03:57:38.2270000

Hello all, I'm pleased to introduce myself to this forum as "Tinker." As my username suggests, I'm a passionate inventor and Tinkerer when it comes to all things science, technology and all things in general. While I may have basic electronics skills, my enthusiasm for understanding and learning makes up for this. I learn by doing so trial and error is to me a right of passage. I recently built a basic Bedini motor and experimented with some modifications inspired by Tinman's YouTube channel. This sparked my curiosity even more so I'm here to take the next step in my energy exploration journey. I've been following AboveUnity's videos and others related to this topic for a few months now and things starting to click and come together for me but I'm sure I'll have quite a few questions that may seem a bit ignorant to the experts here. I hope you'll bear with me as I seek to expand my knowledge and share my experiences. I'm looking forward to engaging with all of you, learning from your expertise, and contributing to the discussions in this community. Thanks for welcoming me aboard!

Hi All great to be here.

2023-12-08T15:19:57.1770000

Hi All,

I am from AU in Perth, have dyslexia so reading/writing is a pain for me, I learn mostly through visual observation.

Just wanted to intro my self a bit. Feel free to ask question at anytime as I am mostly an open book.

I am not sure if there is a question area to put in if we have technical question etc.

For now I will just ask one here.

I just got my DSO (so still learning how to use it) and have tried to find the resonant frequency of my coil.

I followed the instruction on a video Chris did titled "Sweep to find Coil Resonance".

I got to about 80khz and had my coil go from 18v pk2pk to about 100v pk2pk. This seems excessive to me based on what was in the video Chris did.

Probe set to x10 same with x10 in the DSO settings. I am unsure of the proper connections as in the video it is hard to tell.

I had one lead of the coil connected to my Victor 2002 sine gen on the red connection, the other end connection to my DSO probe and both the grounds connected together.

I have a video I made and posted to my YT, if it help I can share the link.

Looking forward to some cool experiments and maybe even some AU.

So far I have learnt a tone, thank you Chris and All for the great work.

Regards

ZeUs21

Hi, I am

2023-10-24T23:45:34.6070000

Hi all,

I am new to forums (and honestly life...) and such so forgive me. My name is Marcus and I am 25 years old and I learned electronics in high school at a school where they taught the basics up to digital circuits. Most of my in-depth understanding of electronics has been, throw me into the pit and figure it out, and I have done pretty well at not crashing and burning, that's not the case for the devices I have blown up. I currently I work at a company called Flock Safety working with engineers to make License Plate Readers. I am having a lot of fun learning a lot about how to design circuits and learning how to do the things that I really want to do and be good at. Every day is a day to learn something new. I have had a lot of trial and error, and I am confident in myself when it comes to understanding new topics, but I guess that might just be me being young. I am not very good at communicating clearly, I grasp new topics well but I have ADHD so when I try to explain anything I have learned it often comes out as a jumbled mess, so I am sorry if that is what happens here, I will try to be as clear as possible.

When I initially started learning the stuff, I have seen on here I was skeptical as most should be, but the more I looked into everything here I found that I must, trust but verify. I haven't started experiment yet, but I purchased an O-scope and I got my FG today, still need to make the Reliable switching system and some of the other stuff, but I am going to be doing that very soon. I have a few coils made that should be enough to test with, I have one that is big, one that is medium, and one that is small, and I am playing with the ratios as well. I am going to start simple however because I have been given some guidance to do so. I have plenty of time and energy to do it so if there is anything you recommend me try first or anything that I should buy or make let me know. I am going to approach everything I say here as more of a question rather than relying on my own understanding. I am young dumb and eager as most kids are, thank you for being patient with me.

Thanks for giving me a second chance!

Hello from canada

2023-09-03T15:30:36.6470000

Hello

Hi from Uganda

2023-04-20T04:33:46.1170000

Hello to all members, iam glad to be finally join this forum I really have respect for all doing research on these devices and I have been doing the same research. Iam an electrical engineer and worked mostly on electrical systems on oil platforms in the north sea. I replicated the Bedini ssg and Newman machine with success and attempted Tom Beardens MEG with little success. While searching information on the MEG I came across to this site and realized this is the only place with people doing research on this field. Iam a from Uganda and have no access to amorphous cores but I tried with what I had available. Chris thanks for sharing your knowledge, i have been studying bucking coils and attempting the asymetrical transformer, iam ready to share my progress and get some help to progress further.

New guy, Introducing myself

2023-04-17T11:41:14.8300000

Hello! The registration form finally works! 🙂 Chris, I had actually left a message about that on your second to most recent video. I also tried the site's contact form and the email address for the wise donations, both sent back MAILER-DAEMON, undeliverable. I hope that is all sorted, and sorry for being spammy.

My name is Marcel. I grew up in California USA, spent about 5 years in the US Marines which landed me in Finland, and have been here now for about 16 years. My education was in embedded electronics, however, most of my career has been I.T. security and software testing.

I was into energy research a bit over 10 years ago, mostly at energeticforum. Spent some time messing with Eric Dollard's Crystal Radio Initiative. I never did light up a light bulb from a local AM station, but I was successful at getting a bit of action over 80 meters with my Tesla coil style antenna, which I had floating on a nearby lake. I also managed to achieve a bit of energy transmission over my house heater radiator system, from my basement to the second floor. I re-uploaded a few old videos about that. Nothing above unity, but the study of the longitudinal waves was really interesting. My channel. https://www.youtube.com/@FringeIdeas

Anyway, I had gone through a nasty divorce and quit research. Recently I started watching videos again, out of the need of a hobby. It's unbelievable how much trash is on YouTube now. But I was lucky enough to come across a few Don Smith videos which grabbed my attention. These led me to the aboveunity YouTube channel, which then led me to the aboveunity forum. So for 3 weeks or so I've been going over as much material as I can, and I'm quite excited to finally see and understand an application of asymmetry.

I'm going through the builders guide currently. It will take me another week or two to complete savings and purchase a function generator and scope. But when I get my gear in place I'll start with the intro experiments, MrPreva experiment, etc. and go from there. A huge thank you to Chris and everyone who has contributed and worked so hard. This forum, plus the information on the YouTube channel, is quite an amazing collection of work and research. I really hope once I get up to speed I can help contribute.

Thank you again, and nice to meet everyone!

Marcel

Introducing myself

2022-11-30T20:13:17.0130000

Good afternoon all. glad I was finally able to register today. I was having problems earlier this year trying to register on the site. I know that Chris had mentioned some problems that had to do with may be DOS or DDOS attack on the site. But I am glad the registration portion worked today for me. I will post a little bit more this evening after I get off work. TY for such a great, unique site where like minds may talk and share.

earthbound0729

New Member Intro

2023-01-18T21:36:59.0630000

Thank you, Chris for accepting my membership to Aboveunity. I found Aboveunity/hyiq about six months ago and appreciate all the effort and dedication to communicating and advancing the technology. I most admire those who have gone before like Nikola Tesla, Thomas H Moray, Thomas Bearden, John Bedini and Floyd Sweet. Both Moray and Sweet built systems to extract energy from the ether vacuum and demonstrated them enough to show the way. Sweet, by far, left more information, documentation and clues about the basic process involved. I can only imagine what kind of world we would have now if their work was embraced and adopted instead of ridiculed, hidden and buried. For me, the challenge of understanding and reproducing Floyd Sweet’s system would be the most fun adventure I could imagine.

I’m a retired mechanical Engineer who has always enjoyed building with my hands. I specialized in machine shop in High School and that lead me to following engineering. In the past I have built and flown two airplanes and thoroughly enjoyed both the building process and piloting. Today I have a workshop which includes both fabricating and machining capability. Just recently I have assembled a dedicated work area for electrical R & D.

Project one was to build a coil winding machine and perfect my coil winding skills. Now my time is spend learning how to operate an oscilloscope, signal generator and making PCB’s. Also, trying to learn and absorb the tremendous amount of information on Aboveunity fills up my days. I’m at the beginning of the learning curve, so it will be quite a while before I can even communicate with the very smart researchers on this site, much less make any meaningful contributions.

I live in central Arkansas, USA and would love to connect with any members in this region of the US who would like to communicate and share. Again, thank you for accepting me in your community.

HIVIEW (Craig)

The truth

2022-12-14T17:28:27.5630000

I'm writting this message here NOT because I want to troll this forum after being banned, but because I just want to say the truth. Yesterday I was banned (Truthfan) and I want to apologize to everybody if my actions caused trouble. It was not my intention, far from it. Chris was right in ONLY one thing in his announcement about me. I did try to download the web page backup from different adresses on several occasions. But not for a reason he stated, that I was trolling, cutting sites bandwidth but for three different reasons: 1. I have old windows xp on my laptop that doesn't open web pages at all or opens them very slowly which makes it very difficult to navigate the site 2. After looking at forum that has tone of info and needs a long time study I wanted to have some backup in case something happens with the site 3. The download speed was to slow on my laptop so I tried to download from my phone( VPN was left on after browsing web) , sister's computer on other ISP, but it was still to slow so I aborted it after min, or two. Yesterday I tried for longer but the server aborted it by itself. I didn't download anything in the end. It seems like trolling but it wasn't. I didn't think that it would cause such problems and missunderstanding if it was permited by the owner. I know it is hard to believe anybody these days because there are real trolls out there but this was not the case. It's embarassing and upseting for me because it puts me in a category of people I despise. I had to say my side of the story so that the people can decide for themselves and maybe not jump to conclusions to fast in the future. I'm also sad because it makes me wonder can we as a society in global get out of matrix with such distrust and wounded mentality caused by the bad people. Best regards, Truthfan

Hello from Ansen

2022-10-01T19:41:34.2600000

Hi everyone, I'm new here. I've been working on free energy projects during the last couple years.

I'm just blown away by the stuff that you're talking about here, it's almost like it's too good to be true. I can't wait to get my lab set up again (I just moved to Europe) and try out stuff. I don't have a background in physics, just a bit in electronics, so some stuff is pretty hard to follow, but I'll figure it out. I think it's high time to get something going, electric power prices are skyrocketing... I look forward to working with you. I've got a 4 chan 100MHz digital oscilloscope, signal gen, power supplies, transformers, and tons of wire and components to work with.

Best regards, ansen

Hello New Member Andreas

2022-02-11T00:35:51.3100000

Hello,

I am new on this forum, I do researches for free energy devices since about 10 years. I learned much about physical basics but was not yet able to produce energy efficiencies over 100%.

In the last weeks I reed much about bucking coils, the threads here, the very interesting experiments shown, but I am a little confused. It is in my opinion, very essential to understand the basics first, before you heat up the soldering bar. So the same seems to be true for bucking coils:

It should make no matter, if you take a transformer priciple or not, or if there are some diodes, capacitors and so on. In my understanding, the key to success is the bucking mode of two coils, canceling out each others magnetic fields. Some people pointed out, it is the magnetic delay, which makes it possible to draw enery from the vacuum. The coils need distance to each other. When current flows thru the opposing coils, the moving charges (current) first seeing two single coils in series. The inductance is relatively high (L1 + L2). The two single magnetic fields of the coils are moving toward the other coil to cancel out each other. This should be the magic moment. The series inductance of the two coils falls significantly, the current rises. This current rise should be awaited by conventional rules of physics. According to this rules, only the power supply should deliver this current. It is said, that this current will rise more then expected, when the bucking mode is correct. The next step is to turn off the current. The magnetic field in the core is relatively low, because the two magnetic fields cancel each other. Anyway, we still have relativly high current (caused by bucking, magic effect), so we have a magnetic field in each coil, which is decreasing with decreasing current, Voltage is induced due to Lenz Law. This two decreasing magnetic fields are traveling in the core towards each other. This should increase the flowing current, the magic moment should occur again.

With this things in mind, we can try to proof it. In my opinion we can reduce the problem by focussing on three questions:

How strong should be the coupling of the two coils?
How far must be the distance between the coils?
How many current must we use and is it useful to go toward or even beyond the saturation of the core?

A supplier company for magnetic cores has given me 13 kg of transformer iron for toroid cores for free, useless rests for them. So I want to try it. The first goal should be the answer to this questions. With this answers, every electronics freak should easily be able to build a simple power generator. Sure, many of you did more or less sucessful experiments with this stuff, great respect for it. But by solving this questions first, the things will become clear. Every well educated person then should be able to understand existing schematics or be able to construct his own solution.

My own answers to this question in this moment are:

The coupling should be as strong as possible, because then the reduction of inductivity is very high.
First I thought it must be as far as possible (13kg iron).. Later I read a document on this forum, which speaks about 5cm for air cores. Sorry, I dont remember where I found the link to the PDF. If the 5cm is correct for air, I would expect a little shorter distance in iron, because the magnetic wave in iron should travel in less then light speed.
I believe, the higher the current, the more "magic" occurs. But saturation mode of the core should be tested in this relation.

I would be interested in information about this topics. Then I want to build a generator. Maybe the answers already exists, then I can save the time and material for those tests. I am always happy to share expiriences made, with people who work on the same "strange" stuff.

Best Regards to the other fighters for a better world,

Andreas

Hi to everyone

2021-12-02T05:10:25.8730000

Hi to everyone

I just found out about the forum and paired output coils and have been watching all the videos to get up to speed.

I'm not tech literate but I'm inspired to buy some equipment and start understanding the concepts.

It seems that this is the ground floor for a whole new paradigm for electrical engineering and I'm excited to be a part of it.

I've always been interested in anything energy as I know cheap access to energy should be accessible to those that are capable.

I think the jury is still out on if it should be readily accessible to everyone because I know some people are just chomping at the bit to destroy themselves and those around them selfishly with these powers.

I'm a Christian and believe that through retraining the beast inside all of us we can access a wellspring of willpower that can protect us from these self destructive forces. And so I think it is critical we approach disclosure of solid state energy to the public with caution and that we do so creatively to encapsulate this idea of being able to constructively use this power without hurting ourselves or to use the selfish forces of capitalism to destroy itself as without scarcity the value of money as capital is diminished.

I think there is lots to be said on this but not for now.

Just hello for now

And happy to be here

I want to buy a scope and was thinking of one of the new Hantek DSO2000 Series devices but was not sure if these are adequate. Any help there is much appreciated.

I'm not sure the technical aspect of things would be my strong suit and I may be of more use in other ways. Either way I'm here and I want to put my time and energy into tearing down the energy cartel for good.

Hy to al members

2021-08-23T09:21:16.5470000

Hy to al guys here.

I am realy happy to see forum operational.

I found this forum some time ago and neded some time to figure out what is all about, when i did it was gone.

I try to lern from way back machine but i didnt get far.

I realy like to learn, it woud be nice to have some tutor to tell me where to start and kik my ass from time to time.

Why electricity, simple, nobady tell me about transformer and wires and magnetic fileds or eletric field on eny school i was, even on the university, every teacher was quiet about this magical stuff from witch al things are made.

I live in cnc world at the moment, before this in construction, but by the nature i am kind of a thinker so studiying is in my blood i think.

Thank you for having me and i hope it woud be constructive and fun.

( i dont now but i need to wait for 5 minutes that page is opened and even then it isnt loaded in ful, problems on my part, internet viwer program or somthing else?)

Hello everybody , nice to be here.

2021-08-18T22:06:39.7900000

Hello friends.
My name is Melendor and I am a wizard.
My magic is speed reading....10 words / seconds, usually.
I have read the whole forum around 4 times , and also the book that Chris has wrote.
I apologize , but the mind makes things over-complicated sometimes, and I need your help.

I find the forum very very interesting , and I know that the effort to put the community together without trolls is very very huge.

I have great interest in Chri's 3 coil machine and I will follow his recommendation with the basic setup.
I will keep things as simple as I can until I have a good grasp of things.

Thank you everybody and it is my pleasure to be here.
Hope things will run great.

Stay safe and take care.
*Melendor the wizard

Quick intro

2020-10-21T06:19:23.3500000

Hi all,

I came across Energy from the Vacuum series around 8ish years ago.It's fascinated me since then, even though I didn't really have the means to explore further. I've come around this site every now and then as well. Lots of great information.

Fortunately, I'm in a good place now. I have the means to purchase equipment and start learning and experimenting.

I'm extremely interested in the MEG primarily, and the Bedini SSG to a lesser degree.

The core for my MEG is on order, and I am planning out purchasing the remaining items.

I'll be pouring through the threads here, lots to brush up on. Any tips or resources that you more experienced guys have that you can point me towards would be much appreciated.

Thanks!

-redline84

Hello Everybody

2020-10-01T17:14:59.0800000

Thank you for letting me join. Im stil trying to find my way around on this website.This seems to be a great place for me to get awnsers and maby make a friend or two and share some of my discoveries.Im kind of new to this field and accidentally about a year ago made some advanced discoveries while doing experiments. I found a lot of things already but im not sure if they are known or not or what the significance of them are.I doent want to be judged on how i do my experiments or how dangerous it is and told i must not do it. I am my own person , i do what i do because i love it,but i appreciate if people help me if im wrong whatever the case may be.Thank you for the information contained herein and the opportunity to interact with fellow researches.

New, but not.

2018-07-18T03:14:27.0270000

Hello, Hope all are well,

Have been experimenting for many years. Get an idea and build it using basic concepts and principles of physics. I may spend 20+ hours a week, sometimes less and sometimes more, having as many as six or seven devices running at a time. Had to build a Tesla hairpin circuit, a very useful device for experimentation. Built many pulse motors and oscillating transformers, which have self charging capabilities, batteries are the main power source. By the way.....Don't do the calculations, use empirical method only, trial and error, lots of error. If you let the smoke out of those components, they won't work any more!!! Well, to make a short story long [that's a joke] and because of sometimes being long winded, there is one device which could be of much importance and in various areas. The "field coupled torque translator" is what it is called. Posted it on YouTube on Mar 13, 2017 4:58 PM and have had thus for 88 views, WOW.

As I have placed the idea and design out there for anyone who has a creative imagination. It is not just a physical mechanism, but a method of producing electricity and more, it is an electromagnetic device. I would hope someone will study, learn, and utilize the possibilities which are inherent in it. The link: https://www.youtube.com/watch?v=L1Zi_0Py1ns

Presently am building a Sweet device, if there is any degree of success it will be posted.

When I build something, whether it does anything or not, it has to be well made.

Anyway, I will post any progress with the VTA.

later..........marc.

Apologize

2020-03-16T21:48:36.2700000

Hello everybody
To begin with, I must say that I am the same white Christian who retired after a few days ago.
Thanks to Chris for clearing my steps and I apologize to everyone for accidentally leaving the forum and I won't be upset if Chris forbids me.
There is a lot to say, but I will just say that in those days I was being followed by some gentlemen, probably in black and probably without face, but I am very sure I did not see any physical, only warnings through incoming messages - until I delete all the files on my youtube channel.
If anyone is curious to visit my youtube channel, you will be surprised to find out that all the videos were uploaded the same day. Why?
Chris, thank you again for taking me out quickly. I chose this gesture instead of compromising the forum.
On the other hand, I have to say that I am Romanian like some who work in the front line. Bravo .....
I speak and write in French and Spanish and very little in English.
For the practical part .... I'm trying for a while to reproduce your successful Chris, with all the variants of partner coils. I will try to expose two videos in the profile thread and ask you to tell me if they are close.
Thanks. Cristian

Hi

2020-03-03T10:18:21.5630000

Too early to think of a username, hi I'm Andrew.

Looking forward to re-doing the Mr Preva experiment and maybe not failing this time. Having had a go, and then a stop and a think, I see now where my replication went astray, and how to straighten it up.

I'm an entry level noob at electronics, took me two attempts to get a diode the right way round, lol, but I am learning. And fascinated. I understand most of the concepts, some of the maths and the very simplest of schematics, but I am improving, slowly.

Nobody ever succeded by not failing.

P. S. The 'forum help' video was great, but I am lazy and posting from my phone. Not sure if this will go as planned...

New member from Germany

2019-05-13T23:33:39.6670000

Hello guys.
My name is Sollaris1989 and I am living in Germany.
I am glad to be here with you.
I hope you guys are doing well and making progress.
Stay safe!-!-!
Thank you.

Any benefits of living at the highest ground on Earth ?

2019-09-15T15:03:00.5500000

Hello I am new here

Hello to all

2018-06-19T09:46:48.7600000

I would like to say Hi to all and introduce myself. Vince is my name.

Currently I am a software/web developer. Although I have no genuine degree in engineering I was once awarded an Hon BS Mech Eng by QUT for "contributions to the advancement of science". To be perfectly frank, it was probably more of a political thing than anything else as I am certainly no genius. Engines, specifically jet turbines and scram jets were my thing at the time. I spent 2 years at QUT as a project manager which involved the modelling and testing of a new type of scram-jet.

I began earnestly developing an understanding in electro magnetics about 12 years ago. I sometimes feel I know less now then I did when I started this journey. Initially I spent about 5 years on the news.alt.physics.electromag forum discussing various related topics almost daily. I was more of a lurker than a contributor.

My learning has been hindered by chronic fatigue syndrome which developed from a virus I contracted in 1995. Thus, I am slow to learn, and have serious trouble both remembering things, and with concentration. So, please be patient with me

Thank you.

Vince

Greeting

2018-03-17T20:05:17.0770000

My name is Pierre and I'm working as an electrical engineer

It's been four years I dived into the free energy topics and I enjoy this quest

so I'm happy to be part of this forum

Thx

Good morning OZ wherever you are !! :)

2018-03-16T18:11:14.5830000

Good morning OZ wherever you are !!

it's me again, Alohalaoha. Nice to be there and talk with VERY HIGH IQ people....

Saga continues

Take care and good luck in Anomaly Experiments....

Best wishes

Enjoykin2118

ps. BTW now is 2118 year. Who had stolen 100 years from our past ?

the answer is: THE MATRIX and Annunanki bustards....

Hi from Romania

2017-09-26T18:42:26.9770000

Hi to all, from Brasov, Romania!

I am trying to get out of grid...looking into replicating some of the work/transformers seen on your website.

Thanks for posting good and challenging information!

bugaian.