2x Total Watt power from resonantly tuned transmitter and receiver coils

  • 337 Views
  • Last Post 18 September 2023
JenkoRun posted this 17 September 2023

Evening all (or very early morning in my case) I didn't see any posts here about this so I figured I'd share:

MTECH has been experimenting with these coils for a while now and has shown very interesting results, the transmitter coil operate on a hairpin like circuit driving the primary to produce LMD Displacement Currents, otherwise known as Cold Electricity, Dielectricity, or Radiant Energy, Tesla's "Non-Hertzian" waves, he's even shown examples where multiple receiver coils can be connected to nearby metal objects and have power drawn without putting any strain on the transmitter.

Also here's another video from his old channel with some abnormal bulb lighting from LMD induction, has anyone seen any of this before?:

This is also my first post on the site, hi 👋

Order By: Standard | Newest | Votes
Chris posted this 18 September 2023

Hello and Welcome JenkoRun,

Thank You for sharing your setup. I agree this type of setup does have potential. However, Digital Multi Meters should not be used as any sort of guide, they are very unreliable at high frequency, also if there are any transients apparent.

So please be very careful with DMM's, they should not be used as an indication of circuit performance.

The YouTube Channel: Akula Vids ( https://www.youtube.com/ @akulavids171/videos ) has a lot of work along these lines, showing many machines that run by themselves. Nothing new, its been common place for many years now!

Also, please do not use my platform to promote your YT Channel, name removed due to suspected spamming issues. Spam is against our rules.

Nice to have you here with us, welcome!

Best Wishes,

   Chris

  • Liked by
  • Augenblick
  • Madscientist
JenkoRun posted this 18 September 2023

Hello and Welcome JenkoRun,

Thank You for sharing your setup. I agree this type of setup does have potential. However, Digital Multi Meters should not be used as any sort of guide, they are very unreliable at high frequency, also if there are any transients apparent.

So please be very careful with DMM's, they should not be used as an indication of circuit performance.

The YouTube Channel: Akula Vids ( https://www.youtube.com/ @akulavids171/videos ) has a lot of work along these lines, showing many machines that run by themselves. Nothing new, its been common place for many years now!

Also, please do not use my platform to promote your YT Channel, name removed due to suspected spamming issues. Spam is against our rules.

Nice to have you here with us, welcome!

Best Wishes,

   Chris

Um, Chris? This isn't my YT channel or my setup, my channel is under the same Username. This channel belongs to MTECH INDUSTRIES which I stated in the post description.

Also this is not an AC system, the output of the receiver coil he's built uses several series connected Diodes on his receiver coils to rectify the output as he wasn't able to get proper results without rectifying it, you can see the diodes in the close up sections of his videos. (Unless you're talking about both AC and DC as high frequency? I don't know if his rectified output is smoothed or not.)

Also the main point of this post wasn't just the output but of the type of power, I don't see many posts about Dielectric induction and this is one of the very few channels I've found that shows experimental work using them, you can see he's using them from the rectified LED lighting up on contact with metal objects in his room from a significant wireless range which doesn't happen with AC or DC power systems. If you combine both above unity techniques and LMD induction you get another leap in technology.

I've not heard of Akula but from a quick glance the setup is indeed familiar, but I can't make out much more beyond that or how similar the circuit design is to Mtech's, I'll need to look at them more.

Chris posted this 18 September 2023

Hey JenkoRun,

Um, Chris? This isn't my YT channel or my setup, my channel is under the same Username. This channel belongs to MTECH INDUSTRIES. Which I stated in the post description.

 

Don't worry, we are all good. We have a rule about spam, I dislike spam with a vengeance, so now you know, its all good. I am strict but fair, we are not allowing our forum to become pages of Useless like the others do, so that means Moderation is required, all I am doing is moderating.

Also, this is not an AC system, the output of the receiver coil he's built uses several series connected Diodes on his receiver coils to rectify the output as he wasn't able to get proper results without rectifying it, you can see the diodes in the close up sections of his videos.

 

All Resonant systems are AC Sinusoidal, the diodes just means he is pulling power out from one side of the AC. LCR Resonant Systems are not Aboveunity by themselves! 

I've not heard of Akula but from a quick glance the setup is indeed familiar, but I can't make out much more beyond that or how similar the circuit design is to Mtech's, I'll need to look at them more.

 

Lots of research to do! We have many running working machines here, we have gained much knowledge over the years, and we are still learning, always more can be learnt. In saying this, we are light years ahead of the other forums.

Look for the Spoiler Alert on the home page, this is a small glimpse of what we have achieved!

Again, welcome!

Best wishes,

   Chris

We're Light Years Ahead!
Members Online:
What is a Scalar:

In physics, scalars are physical quantities that are unaffected by changes to a vector space basis. Scalars are often accompanied by units of measurement, as in "10 cm". Examples of scalar quantities are mass, distance, charge, volume, time, speed, and the magnitude of physical vectors in general.

You need to forget the Non-Sense that some spout with out knowing the actual Definition of the word Scalar! Some people talk absolute Bull Sh*t!

The pressure P in the formula P = pgh, pgh is a scalar that tells you the amount of this squashing force per unit area in a fluid.

A Scalar, having both direction and magnitude, can be anything! The Magnetic Field, a Charge moving, yet some Numb Nuts think it means Magic Science!

Message from God:

Hello my children. This is Yahweh, the one true Lord. You have found creation's secret. Now share it peacefully with the world.

Ref: Message from God written inside the Human Genome

God be in my head, and in my thinking.

God be in my eyes, and in my looking.

God be in my mouth, and in my speaking.

Oh, God be in my heart, and in my understanding.

Your Support:

More than anything else, your contributions to this forum are most important! We are trying to actively get all visitors involved, but we do only have a few main contributors, which are very much appreciated! If you would like to see more pages with more detailed experiments and answers, perhaps a contribution of another type maybe possible:

PayPal De-Platformed me!

They REFUSE to tell me why!

We now use Wise!

Donate
Use E-Mail: Chris at aboveunity.com

The content I am sharing is not only unique, but is changing the world as we know it! Please Support Us!

Thank You So Much!

Weeks High Earners:
The great Nikola Tesla:

Ere many generations pass, our machinery will be driven by a power obtainable at any point of the universe. This idea is not novel. Men have been led to it long ago by instinct or reason. It has been expressed in many ways, and in many places, in the history of old and new. We find it in the delightful myth of Antheus, who drives power from the earth; we find it among the subtle speculations of one of your splendid mathematicians, and in many hints and statements of thinkers of the present time. Throughout space there is energy. Is this energy static or kinetic? If static, our hopes are in vain; if kinetic - and this we know it is for certain - then it is a mere question of time when men will succeed in attaching their machinery to the very wheelwork of nature.

Experiments With Alternate Currents Of High Potential And High Frequency (February 1892).

Close