Fake Data in the Community, and abroad!

  • 473 Views
  • Last Post 19 December 2022
Chris posted this 08 December 2022

My Friends,

We see it everyday! FAKE Data, its a VERY well known Tactic that is used to:

  • Try to stop YOU learning about Free Energy Machines
  • Mislead People,
  • Propaganda Nonsense,
  • Make the Field of Energy look foolish,
  • Discredit Genuine People
  • and the list goes on!

 

First, the first and only person you need to prove anything to, is yourself! However, its very important not to allow yourself to mislead yourself, it happens!

Here is an example of exactly what I am talking about:

 

This Foolish and outright FAKE Video is currently at 1.9 Million Views!

Can you believe this! YouTube Promotes, and gives Millions and Millions of Views to Known FAKE DATA!

The Real Free Energy Experiments:

 

sit at: 1thousand views - REALLY? Can you see this very Obvious Tactic? Its so extremely Obvious! 

So you can see, there is a very Specific and very Dedicated effort to Promote Fake Non-Sense and Demote at all costs, the Real Data!

Would you expect to see this very same tactic in the Community?

YES!

People, are actively experimenting, and always showing Fake Data, Data they also manipulate, to show the Machine does not work when the Truth is, it Does!!! We see this all the time! There are a few Members in the Community that NEVER Succeed, after many thousands of hours of Experiment and Study! They never Succeed! They always use the same terms, using your subconscious against you, using Subliminal Messages, and key words, to make you think these Machines don't work, when the:

Truth is, Free Energy Machines Work!

 

We have many people, a group of people that work very hard, using CIA Spoof Tactics against you!

Without these documents, the best investigative reporting in the world could not have produced a book, and the secrets of CIA mind-control work would have remained buried forever, as the men who knew them had always intended. From the documentary base, I was able to expand my knowledge through interviews and readings in the behavioral sciences. Nevertheless, the final result is not the whole story of the CIA's attack on the mind.

Ref: THE SEARCH FOR THE "MANCHURIAN CANDIDATE" THE CIA AND MIND CONTROL

 

So many people have absolutely no idea what has been happening over the past 70+ Years, we have been 100% controlled and manipulated, with no control of our own, but we are starting to fight back now!

I cant stress this enough: Be VERY careful who you Trust!

I have said this many times:

It is statistically Impossible, to Continuously Fail!

Yet, they DO!

 

It is the Members in the community that have been here the longest, that have made the least progress, these Members you need to Beware of! This is a KEY Sentence!

Best Wishes,

   Chris

Order By: Standard | Newest | Votes
Jacek05 posted this 09 December 2022

When I found those videos, was amazed with these simple devices and wanted to do some of them to power just a LED bulb. If to multiply them we could achieve more power. Of course all depends on a cost of parts if it is economically worthy. When I looked more critically discovered those false films are made to cash from adds. If somebody publicise a real working machine it is removed quickly by censorship. I believe there are great, simple machines, because Tesla and other old inventors created many, only simple machines. Raoul Hatem generator is very interesting but very noisy and good for those who need constant large amount of power everyday.

But these dark days, when we have war in Europe, more important is independance from government energy sources. Solar panels at Winter time (when power demand is biggest) are useless, unless somebody has very expensive large power bank. Situation of Ukrainians is dramatic, tragic. This war shows how big influence lack of energy power has on people life, on whole countries. Power of energy power to push out millions of people is now as big as atomic bombs, but has no such disaster effect. That's why I look for a small device even with small power.

Chris posted this 09 December 2022

Experiment shows you Truth Jacek05!

A Post form Jagau:

An oscilloscope probe must be calibrated before being certain of its measurements,

it is common sense that speaks.

It's not a simple question that you ask, it's just to sow doubt.

Leave me alone with your questions that have nothing to do with how I got to this COP.
Jagau

 

You can see very clearly, Jagau has identified a Member of another Forum, that is Just a Misinformationist! A Troll, A CIA Spoof! Trying VERY HARD to make sure you don't get the Truth!

Some may consider this Member a Highly Respected, very Skilled Member of the Community, BUT: That's what they want you to Think! His effort is always FAKE DATA!

We will help you on your way if you start helping yourself!

Aboveunity.com Is Light Years Ahead of the other Forums! We have changed the playing field, and now we have the Advantage and they are scrambling to try to stop you from gaining what they don't want you to have: Real Working Free Energy Machines

Best Wishes,

   Chris

baerndorfer posted this 09 December 2022

i think truth will always find a way to express itself. it's sad what happens online sometimes but we have the ability to stay away from it. yes we can!

 you said it many times man. its statistically impossible to fail every single time.

but they do.

thats great ๐Ÿ˜„

Chris posted this 10 December 2022

Hey B,

I Totally Agree!

I try to Alert Members, new Members particularly, about the problems we face.

A Warning was issued to a member of the Community that has been around for a very long time and done a lot of work:

Quoting:Itsu

I did not refute anything, why so upset if anyone asks a simple question.

I do not trust my A6302 current probe as in the last 10 years i have used them i have my 5th one now, so they are not that reliable, you will notice that sooner or later.

You will not notice when they go defective most of the time and will give you false readings, therefor i always, when possible, do a compare with the P6021 AC only probe when appropriate or with a simple 1 Ohm 1% induction free resistor.   Check, double check.

I am happy for you and everyone who is able to present a COP > 1, but you should expect and accept that people start asking questions, perhaps to replicate your success.

Itsu

Let me guess, we have "measurement errors" here too, isn't ?..

That's not a question, that's a insinuation that Jagau's probe is defective.

The 2.533W input with 4.032W output is 1.6 COP and it surely is a pretty good COP but...

So "1.6 COP, nah...", right ?

Let me ask you something, in 10-15 years on overunity site how many times you had a device showing at least a bit over 1 COP ? I will tell you: NEVER. And now you act like your entire life you worked only with devices having COP 10 and above ! Really ?...

You know why ? Because that's the general attitude there about everything: "nah...". And the result is that site full of "experts" never came with anything new ever in all these 15 years. Because everytime someone come there with a device to present it all the "experts" start struggling to enforce it in the "measurement error" scenario, ineventing "rules" when necessary, ignoring data when necessary, doing everything to come to the unique conclusion present on that site since its beginning: "nah...".

Jagau is presenting the correct formula to calculate the correct input for PWM input using frequency, duty-cycle, voltage and current; everything documented by multiple very valid documents and online calculators. You replied again with some kind of "nah...".

I already see a pattern here, you simply can't get rid of that attitude, isn't ?..

Let me tell you something, we'll not gonna have the b*sh*t from that site imported here, you got my word. Also harassing our members, especially the ones from our core team is a big NO, there will be a warning then the ban.

You may consider this post as that warning.

Continue with this attitude of saying "nah" to everything you see here and soon you'll return to your buddies who can't think outside of the box, can't get over their standard "measurement error" so called conclusion.

I'm sorry, I thought you came here to really try a replication but the "conclusion" you came here looking for is so obvious.

Even if you have examples of ZPM's input reduction effect, your main preocupation was not to check what's different between what I presented or Atti presented or Jagau presented, instead you jumped to make measurements on a device which is not having that effect because that's the "conclusion" you came here for: ZPM is consuming tens and tens of watts. Are you sure what you measured is a ZPM ? Because without the input reduction effect the measurements are useless but very helpful for the "conclusion" you came here for.

This is the voltage and current going across and through the bulbs when at 378kHz resonance as before, again with 20A of P2P current, but a mere 4.7W of power.

There is no real power there...

Ask yourself, if that's the extra-power (with MOSFET off) you see in a device without the input decreasing effect, what extra-power will be there when the effect is present ?

After all your general opinion about this kind of research can be resumed to what you said when you came here:

You keep mentioning Akula or Don Smith's devices as examples, but to my knowledge nobody was able to do a succesfull replication of either devices, so taking them as good examples looks dubious to me at the least IMHO.

So basically what Tesla, Bearden, Don Smith, Akula, Kapanadze, Gunderson etc. did explained and demonstrated are not good examples and are dubious just because we don't know anyone who replicated them, right ? Then what are you doing in this field of reasearch if you really don't believe in anything like this ?..

Anyway, remember, we will not have the useless and destructive attitude from overunity site imported here. I promise that and I'll make sure of that.

 

Its great that others are stating to see the issues we face every single day!

Every body Searching, must Prove Truth to Themselves and Never rely on others Experiments! Doing the Experiment for yourself will give you the proof you need! Learning along the way! Learning the Effects and improving on the Effects!

Best Wishes,

   Chris

Chris posted this 18 December 2022

My Friends,

In the Thread: Failure in Calculating DC Pulse Power we have seen Fighter Insisting on a Calculation to represent the Input Power "his" zpm.

Fighter, the new Community Hoaxer, which has already had 3 Failed Attempts at his zpm toy, that is mostly good for nothing is only days away from complete exposure as a Hoaxer and a Faker that insists on Faking Numbers to make his fake zpm look better than it is! He threatens you with banning or worse if you dont follow his fake rules that we have proven to be fake!

Fighter claims Jagau and Atti's replications are successful, Jagau's already shown to be Faked Numbers and Atti is already stating his replication is not Above Unity!

The generator effect can prevail. But there are a lot of questions for me right now.

 

Fighter is Forcing Data which is FAKE and Wrong!

Beware this Hoaxer and Faker to gain publicity!

Best Wishes,

   Chris

  • Liked by
  • Augenblick
Chris posted this 19 December 2022

My Friends,

Fake Data in the Community is not only a Disgrace, its shameful!

The zpm was always a TOY and they, because they have ZERO, Nudda, Zilch, are desperately trying to make this TOY look like it has potential!

It does not and we will very soon see this, already many have!

If you want real Power, Horse Power, not mouse power, you need to research what I am doing!

You will no doubt see this if you choose to replicate the zpm, with all its many problems and its very poor future! I tried to say this nicely:

I think we need a path that can give us better Results more Conclusively.

I suggest Complete Electrical Isolation from Input Circuit to Output Circuit.

 

The zpm has no future! Its a bucket of cow turd! If you want real success, you need: Chris's Non-Inductive Coil Experiment 

There simply is no future in the zpm!

Best Wishes,

   Chris

  • Liked by
  • Augenblick
Chris posted this 19 December 2022

My Friends,

How does one politely tell someone else that, they do not know what they are doing, and they have mislead others in the community?

Here is how I did it:

 

That's definitively the ZPM's waveform pattern !

 

I need to report, I have seen an Earthing Problem on the Scope Ground.

Using this Circuit to measure the Output:

 

I see an Increase on the Input by 500ma approximately:

 

So not a lot, but this means the Measurements are off by a ways, 400+ mA is a lot in these machines and this can make a significant change.

 

Hi Jagau,

I fixed the problem, see the last post. We spoke of this in Fighters ZPM Thread Here. My Bad, the Scope is now fully Isolated! wink

 

So Fighter never did correct any of his lies, he is not genuine! He actively misled everyone here and ignored the truth even when I presented it to him!

The zpm has no future! This incident was the start of the end for Fighter and CD I already did not trust! He was done, goose was cooked so to say, and his days were numbered even back then!

I tried to give them the benefit of the doubt, now we see them speeding more and more lies and misinformation through the community, so I wanted to share this with the community, to show you I had my suspicions for a long time about them! I was right, they are UNTRUSTWORTHY, Shysters! 

About as Dumb as a Bag of Dog Turd! Dumb as a Brick on a Stick!

Best Wishes,

   Chris

  • Liked by
  • Augenblick
We're Light Years Ahead!
Our Above Unity Machines:

Asymmetrical EMI

Wistiti's Bucking Joule Thief
Non-Inductive Coil Experiment
CD's Non-Inductive Coil Rep
Baerndorfer's Experiment
Captainloz's A-R-E
Aetherholic's COP>4.0

Resonant EMI

Yo's Ferro Resonance
Jagau's Non-linear Resonance
Ferrite at work
Recomended Protocol:
Measurement
Switching System
Measurement Block
Current Observation
Current Sensing Resolution
Members Online:
What is a Scalar:

In physics, scalars are physical quantities that are unaffected by changes to a vector space basis. Scalars are often accompanied by units of measurement, as in "10 cm". Examples of scalar quantities are mass, distance, charge, volume, time, speed, and the magnitude of physical vectors in general.

You need to forget the Non-Sense that some spout with out knowing the actual Definition of the word Scalar! Some people talk absolute Bull Sh*t!

The pressure P in the formula P = pgh, pgh is a scalar that tells you the amount of this squashing force per unit area in a fluid.

A Scalar, having both direction and magnitude, can be anything! The Magnetic Field, a Charge moving, yet some Numb Nuts think it means Magic Science!

Start Here:
Help with using the Forum.
Message from God:

Hello my children. This is Yahweh, the one true Lord. You have found creation's secret. Now share it peacefully with the world.

Ref: Message from God written inside the Human Genome

God be in my head, and in my thinking.

God be in my eyes, and in my looking.

God be in my mouth, and in my speaking.

Oh, God be in my heart, and in my understanding.

Your Support:

More than anything else, your contributions to this forum are most important! We are trying to actively get all visitors involved, but we do only have a few main contributors, which are very much appreciated! If you would like to see more pages with more detailed experiments and answers, perhaps a contribution of another type maybe possible:

PayPal De-Platformed me!

They REFUSE to tell me why!

We now use Wise!

Donate
Use E-Mail: Chris at aboveunity.com

The content I am sharing is not only unique, but is changing the world as we know it! Please Support Us!

Thank You So Much!

Browse by Category:
Weeks High Earners:
The great Nikola Tesla:

Ere many generations pass, our machinery will be driven by a power obtainable at any point of the universe. This idea is not novel. Men have been led to it long ago by instinct or reason. It has been expressed in many ways, and in many places, in the history of old and new. We find it in the delightful myth of Antheus, who drives power from the earth; we find it among the subtle speculations of one of your splendid mathematicians, and in many hints and statements of thinkers of the present time. Throughout space there is energy. Is this energy static or kinetic? If static, our hopes are in vain; if kinetic - and this we know it is for certain - then it is a mere question of time when men will succeed in attaching their machinery to the very wheelwork of nature.

Experiments With Alternate Currents Of High Potential And High Frequency (February 1892).

Close