• Holley Trolley the Desperation Grows!

Holley Trolley the Desperation Grows!

  • Topic Is Sticky
  • 2.3K Views
  • Last Post 09 November 2022
Chris posted this 12 June 2022

My Friends,

I want to point out, in combination with Past Events, Recent Events, and Events as they pass by the Day, the on going effort by the Trolls, the groups of Bought and Paid for Shills that:

  • Spread Lies and Disinformation,
  • Attempt to Divide and Conquer,
  • Discredit me,
  • Distract,
  • Bemean and belittle,
  • Slander,
  • and the list goes on and on...

 

Is getting much worse! I have seen such desperate acts to try to stop me from what I am doing and to try desperately to discredit me and my work!

 

This is great to see, because most can see through the lies and see who the Trolls are, almost immediately!

 

If you were to go out and list the top 20 topics being discussed on each forum, then name the members involved, there is clearly a pattern, the same members were discussing the very same topics 20 years ago!

There has been Zero Progress in more than 20 Years!

The funding behind this effort right now must be massive! Each Troll no doubt costing a lot of money in Hourly Rates to spread so much lies and Propaganda! I have seen before, on average about 10 full time Trolls, but now there is a lot more! Someone has been very busy planning and paying people to Troll the community!

The Fake and so extremely obvious Hoaxes are being throttled by youutube:

 

I ask all Readers of only one thing:

Follow only the Facts! Who has given the most to the Community!

 

Trust your gut and follow your heart! Be careful who you trust! Do not blindly follow others that have nothing! Ask yourself, what has this person done for the Community, what have they added to the community? Anything at all? If the answer is no, then do not follow this person! Again, follow your heart! Follow what feels right!

Many times I have seen very Shonky, Charlatans trying to Con people, and it makes me very angry! You must realise, these people Con you for a reason, either Money or Fame, I want neither!

Elsewhere, all I see is post after post of Dumb Dumb, Dummies talking Dumb! Again, progress in the Negative! Zero forward momentum!

Only ONE Thing should drive you:

Evidence

 

The one thing worse than being Coned by a Charlatan is being Coned by a Troll! Light Up the Darkness!

Best Wishes,

   Chris

Order By: Standard | Newest | Votes
Chris posted this 05 August 2022

My Friends,

The Troll Bickering continues! Like a Cult of Religious Extremists, they gather in Groups, bickering and bickering and more bickering! All while we Progress even further, and make them look like School yard Scoundrel's!

You know, when people take the opportunity to learn something, and then apply it, because Knowledge is not much use, unless Applied, then make even further steps ahead, to gain more knowledge, that's an admirable thing!

When People gain knowledge, and do nothing with it, and sit and Bicker all day every day for eternity, that's NOT! I don't even have a word that describes this sort of Foolishness!

Recently we have seen a lot of trouble from Trouble Makers! I have Banned them for their Actions!

It is these people I expected to do a little better! To BE a little Better and not so Bitter for their Actions, after all they bought down a ton of Bricks on their own Heads! I guess these people just take NO Responsibility for THEIR ACTIONS!

Oh Well, this is just a day in the life of running the Most Advanced Forum in the World! Leaving the rest for DUST!

I want to leave you with this:

One Active Researcher willing to Share is worth a Million that Wont!

 

The Trouble Brews, they are gathering, they will try to stop us, AGAIN, soon, no doubt! There are one or two that are Cooking Up Clownage! Two Clown Villages and Two Clown Groups at least now!

Best Wishes,

   Chris

Chris posted this 17 August 2022

My Friends,

The truth is, www.aboveunity.com is the only forum in the world with answers to the Energy Crisis! No one else is even close! They are a million miles away off chasing rainbows!

I have given the complete Operation in the Thread: Chris's Non-Inductive Coil Experiment and given you a demonstration in Video Seven.

 

In the Thread: Chris's Electromagnetic Charge Pump Experiment I have explained a bit more how all the threads tie in to each other and how I got to this point.

 

My numbers: 3 and 7 are the numbers I like to give glory to, and the third video in the thread: Chris's Electromagnetic Charge Pump Experiment will give the next part of the puzzle, which has already been given in my pages, here on this forum and no where else in the world!

More is coming very soon on this thread, and a video will soon explain how wrong the other forums have been for so long! They are not even close to the truth! I believe some do this on purpose to deceive you and mislead you! Pulling you away from the Simple Truths that are so easy and so cheap!

My Friends, a Glorious Future awaits us all, the only requirement is you Must Participate!

Best Wishes,

   Chris

Chris posted this 18 August 2022

Hi Melendor,

Yes, there is a lot of information for such a simple cheap Experiment that's for sure!

Your Questions:

Is there a downside to this ? 
7 turns primary and 300 turns secondary ?
Or should we stay locked to 1/4 wire length ALWAYS ! ?

 

Experiment is always the best path forward, this is for sure! We have found driving the Input Coil at a 1/4 wavelength seems best and this can be seen time again in all experiments in the past. The Turns used from Input to Output are usually about 4 : 1 or so. Floyd Sweet used 5 : 1, Akula commonly used 3 or 4 : 1. Don Smith: 4 : 1.

I would not get hung up on this, because this can be tuned for anyway.

The real objective is to use a Step Up Ratio at least 2 times the Input Voltage.

Reason: Current I = Voltage V / Resistance R, this means, because we are not the Source for Current, we Pump Current by the very simple Operation of Bucking Coils, or Partnered Output Coils, we need to step up the Voltage on the Output so we also Amplify the Current.

Floyd Sweet said:

The current and potential windings require relatively little power, and are applied in such a manner that rate of flow of moving charges may be accelerated beyond 1 ampere = 6.2418 electrons ⁄ second. Thus the duty factor of the copper changes. I2R Losses diminish and more charges drawn from the now coherent space field flow at a faster rate as current to the load. This means as more current is required by varying loads more feedback magnetomotive forces free more electrons from binding forces complimented by potential magnetic forces of the orientated, coherent space field. Thus a conductor that formerly had a temperature rise above ambient labelled as a factor of 10 would now operate at a temperature of 1.0. Thus the same gauge wire would carry 10 times more current at the same temperature.

 

This machine must use its own Feedback to Accelerate Charge, as was pointed out, so starting by Amplifying the Voltage is necessary first. Bucking Coils Pump the Current, this is obvious from Experiments  we have shared on this forum.

Once one understands Floyd Sweets Quote above, the rest all falls into place. Its a Pump and Charge is moved and Accelerated by Magnetic Forces, or MMF, Magnetomotive Force!

Tuning the Input Coil after one has a Machine Running is very easy. So don't worry to much about this at the start. In Video Seven, I used 200 Turns and 26 on the input, this machine is only a Baby and much better can be done! Use the Thread Coil Geometry to learn more!

Best Wishes,

   Chris

Chris posted this 23 June 2022

My Friends,

Aboveunity.com has a Publically Proven Trend that has been shown over the last few years of being Trolled!

Trolls coming here, and do what Trolls do!

For all reading Threads here, it is easy to see a Tactic of, pretend to ask questions in an attempt to confuse other Readers, and then when they eventually get no where, they go through and they Delete their Posts in an attempt to hide their objective, to Troll and bring about confusion to other readers. In attempt to stop Us Changing the World!

Trolls employ any Tactic to make themselves a useful and valuable!

Trolls do anything they can to achieve their Objective!

One must start asking Questions, when the most simple things refused to be Realised, by so called Experienced Researchers, are these so called Serious Researchers, actually Genuine?

Why is it that so many so called Experienced Researchers make a Concerted Effort to Ignore the Obvious and most Successful Experiments the World has ever seen? Is this not a very obvious Indication that a Concerted Effort to hide Real Free Energy Machines is not only occurring, but is Publically Obvious and Provable, to any Mind that has an ounce of Common-Sense!

Do you think being a Troll would be Fun? Or profitable? Do you think this is an Organised on going Troll Attack?

Do you remember this:

 

In 1902 Mr. Figuera filed 4 patents ( 30375, 30376, 30377, 30378 ) which were sold in few days to a banking cartel as it may be derived in sight of a telegram published in the available press clippings of that year. Certainly those patents are very little detailed and many important features seems to be overlooked. Maybe just because they were going to be sold to the bankers Mr. Figuera filed a bunch of rough patents, just to assure the selling of the invention.

Ref: Clemente Figuera´s motionless generator

 

There is solid Evidence that the Banksters have tried to stop Energy Machines becoming Public! So Trolls are a product of the effort to stop Energy Machines becoming Public Domain!

Best Wishes,

   Chris

Chris posted this 13 August 2022

My Friends,

Who do you think Holds Humanity Back? How do they do it?

The recent activity around the Melnichenko Effect has bought to light the Cult like Behaviour of Trolls in many places! We have seen behaviour from many people in many places that is just despicable! The actions of a bunch of Desperados! Very very desperate people! There is a more board agenda here:

X22 Report - FBI Raid Is Not What You Think,[DS] Knows They Lost, Narrative Change, Playbook Known

 

I want to share with you all, that this behaviour will get worse before it gets better! We will see more attacks, more deception and more Fakery from what the community thought WERE trusted Members of the Community!

Over Time, it will reduce and then some of those people will smarten up a little bit and start to realise how Bitterly Wrong they were! Some will actually end up in Jail for their Sedition and Treachery!

So, My Friends, Hang on Tight! Its gonna be one whopping Thrill Ride and a lot of Shock and Disbelieve will come! Be very Careful who you Trust, because many are sleepers, just waiting to be activated!

Then, the day soon comes, when everyone on the planet will have Energy Machines that are Cheap and put out a very large amount of Power! This is much easier than you could ever imagine! They have Deceived You for over 100 Years! No More! They are about to LOOSE Everything!

Best Wishes,

   Chris

Chris posted this 05 September 2022

My Friends,

Some readers read something, and interpret it entirely wrong. Some do not, that's why some succeed, and some don't!

There are a large number of Total Buffoons that Plague this Field, and one can not help but assume they are Paid Trolls! Paid to reek havoc and create disillusion within the community!!!

It is so see through, that these people are actually the ones that are Useless, all while we Succeed! Not a single one of them can recreate ANY of the machines we have! 

They have Systematically FAILED at Every Attempt!

 

They have NEVER been able to recreate our results! I call this Useless! That's why we have a very strict No Douche-Bag Aloud Policy!

 

Watch the Videos, its all there! PROOF, LOGIC, and the evidence they try so hard to dispute! Uselessly!

 

Do you remember this:

Many here laugh at, and mok EMJ, but the fact is , he is basically right in what he is trying to put forward.

Ref: Tinman telling you I am correct

 

 

My Friends, the list just keeps going on and on, many here don't want to share simply because of these very same BAFOONS!!! These very same BAFOONS that cant grasp SIMPLE Concepts, or read one thing and their Intellectually disabled brain cannot understand what's actually been said! Or worse, they are PAID to make a mockery from simple Logic! What TOTAL Buffoons they really are!

 

It is Statistically Impossible to Continuously FAIL!

 

So, ask yourself, Why do they ALWAYS Fail!

So, WHO is USELESS?

The BIG Mouthed Buffoons', the Idiots that have never contributed anything to the community, and I have a bunch of people I could name, of course NONE Here at Aboveunity.com!!!

A MUST Watch:

 

Many here have told you, here is one from Aetherholic just the other week:

My first post in a long time.

COP = 20 in a different but not too far removed configuration. And no im not going to post it, just to ratify the effect is real. (measurements verified by scientific report) and loopback self running. Trust in Jagu and Chris and all the information Chris has provided. 2000% the truth.

 

PS:

Put black tape over your psu meters. Use an integrating power meter with high sampling rate rate for the input power. Alternatively, use oscilloscope and use the calculation I will post in a separate thread tomorrow which is a simple verified equivalent.  OU is being hidden in measurement errors.

Ref: Aetherholic

 

Another thank You Message today:

you are a genius

if you ever come to the States, let me know

do you anyone here in the states, that built one of your devices..

building an off grid homestead here

thank you

 

I very much appreciate people letting me know of their success!

We can NOT Help Brain Dead Buffoons! We can ONLY help Normal Logical Thinking Human Beings that have had enough of the Stupid!

This is why Aboveunity.com is Light Years Ahead, and always will be!

Best Wishes,

   Chris

Chris posted this 25 September 2022

Hi B,

Yes you're right! I did not yet want to bring this up, but now you have, this is a possibility in some instances:

Conventional instruments used to measure volts, amps, or watts 
       appear to correlate machine output as coupled to loads, but  only 
       up to approximately 1 KW; above that value they may indicate zero 
       or some other value not related to the known actual load.
       

Ref; FLOYD SWEET'S VTA UNIT by Walt Rosenthal

 

I will go into this more later.

Best Wishes,

   Chris

P.S: I have seen some of Baerndorfer's work, and I can confirm its 100% excellent work and first class workmanship!

Chris posted this 14 October 2022

My Friends,

We have changed the world!

We have exposed the:

 

We have Free Energy Machines, and yes some of us have Self Running Machines! Some of us are not far away!

WOW, the other Forums are:

LIGHT YEARS BEHIND!!!

 

Others have no idea what so ever, how Energy works, or how its "Generated"! Some are totally asleep! Some choose to be Dumb Asses! Especially at beyondstupidity.rom or what ever it is... Dumb cant be fixed!

Aboveunity.com is Light Years Ahead of the Other Forums!!!

Best Wishes,

   Chris

Chris posted this 16 June 2022

My Friends,

Aboveunity.com is the one and only World Leading Energy Research Forum!

Other Forums have a common theme, 99% non-sense, nothing of value, nothing that is worth reading!

Aboveunity.com contains 99% valuable, important, dedicated Research information that helps all readers move in the right direction! This is why so many other forum members come here to read and study our pages! That's why we are the most popular, most valuable forum in the world! That's why we are world leaders in Energy Research! 

Aboveunity.com is where people come to succeed and make advances well beyond the non-sense that people have been exposed to for decades, going around in Circles, being Trolled, and too scared, or intimidated against making advances openly, in a so called public forum!

At aboveunity.com everyone is safe, everyone is encouraged and is free to advance openly and Publically!

We look down on, and Troll the Trolls:

 

 

Those Trolls working for the Low Life Elite Hypocrisy, working to try to keep the wheels of a broken and corrupt system working well beyond its expiry date! The System is Broken and is failing fast!

Learn how to build your Own Power Systems, we show you how to do it, its easy and its cheap!

Best Wishes,

   Chris

Chris posted this 12 September 2022

My Friends,

The Guru's are a bit confused: 

This is the goal then.
Lenz's Law applies to electromagnetic induction, a magnet inducing current in a conductor.  To avoid this law, one must induce current with another method than a magnet or magnetic field.  This does not mean that other laws will not be applicable.  I agree that using magnetic fields while attempting to avoid Lenz's Law is futile.

 

Induction is simply the effect of the coulombic field of a charge on another charge when they are in displacement with respect to each other because one or the other or both are in a current, whether this current is electric or the equivalent of spin in a magnet.
The motion distorts the coulombic field according to the laws of relativity, it is no longer isotropic, the effect is called "magnetic field" by classical electromagnetism. It becomes this electric induction field when the velocity is not constant anymore. The relativity allows to pass from the field seen by a charge to the one seen by the other.

Lenz's law is therefore only a macroscopic consequence of a more fundamental elementary phenomenon between charges that influence each other, a reciprocal phenomenon, a charge not knowing if it comes from a generator or from a load.
The "free energy experts" talk nonsense about it and prove their ignorance by their inability to reach any operational result for decades, in their derisory fight against Lenz's law. The "futility" you speak of is only there.

Ref: F6FLT - Resonance energy methods - Don Smith revisited

 

 

OMG they are totally lost!!!

 

I predict, they will never succeed.

We are Light Years Ahead! PROOF, LOGIC, and the evidence they try so hard to dispute! Uselessly!

 

Do you remember this:

Many here laugh at, and mok EMJ, but the fact is , he is basically right in what he is trying to put forward.

Ref: Tinman telling you I am correct

 

 

We have shown everyone how its done, with massive trail of Evidence! Evidence like NEVER Before!

Perhaps some people should try out for the Special Olympics instead of doing Energy Research!

 

Best Wishes,

   Chris

Chris posted this 14 September 2022

Hello Scalarpotential,

Captainloz removed, took down the last videos, because he was being harassed by members of other forums! It got to the point where he no longer posts, or visits the forums because he got sick of the harassment!

Please see: Captainloz's Asymmetrical Re-gauging Experiment

Harassment is a tactic they use to make the member give up and no longer participate!

Loz and I still communicate, he is a good friend of mine!

Best Wishes,

   Chris

Chris posted this 18 October 2022

My Friends,

Bill Gates pays people to track what people are saying about him:

 

Do you think its possible, groups of people are being paid to Troll Free Energy Forums? I think for most, its a reality and we know it to be true!

I mean, the way the world is going! Has anyone seen these yet:

 

Is there any normal person that would use these? OMG!!! Idiots are at the top, in charge of very important decisions! 

Best Wishes,

   Chris

Chris posted this 17 June 2022

My Friends,

OMG, The absolute rubbish I read on the Power Engineering, on other forums, is just total Non-Sense and no one calls the self proclaimed experts out! People just let them ramble non-sense and carry on like they are gurus!

Don't believe everything you read! Research for your self! Do simple experiments to prove or disprove the Rubbish that others that "think" they know better, spew out non-sense on a continual basis! Believe no one! Prove it for your self!

OMG some so called experts know diddly squat! The ONLY thing they have is a good memory because they read a textbook which can be experimentally proven wrong, yet they recite Defuses Rubbish like their life depends on it!

Some of the so called smartest are the absolute best at being DUMB!

Best Wishes,

   Chris

  • Liked by
  • Augenblick
  • Melendor
Chris posted this 16 August 2022

My Friends,

This is how badly they re trying to hide the truth from you:

 

They employ all sorts of tactics! Fakery is one such tactic! We see this tactic a lot now! YT promote Fakery and others out there push fake experiments! Its all a lie to Deceive you!

The truth is, the answers are right here in these pages!

Best Wishes,

   Chris

  • Liked by
  • Melendor
  • Augenblick
Chris posted this 06 September 2022

My Friends,

In 30 years time, you will see this very same link again and the very same people reading it: A Paper on the Propagation of Magnetic Waves in Soft Iron

 

Funny Eh!!!

 

 

Now that is the Definition of ???

Best Wishes,

   Chris

  • Liked by
  • Jagau
  • Augenblick
Chris posted this 09 September 2022

My Friends,

There are a large number of Total Buffoons that Plague this Field, and one can not help but assume they are Paid Trolls! Paid to reek havoc and create disillusion within the community!!!

 

Some Threads, and Posts I read from other forums are just VERY Poorly Educated Morons! Even the ones that try very hard to appear smart are just Dumb! Filled with Dumbness! Filled with Stupid! Filled with nothing Logical!

Dumb asses still debating what Free Energy is? OMG Idiots!

Oh My Goodness, what a bunch of Buffoons! Total Idiots:

These people need to shut up, and Educate!

What is Energy? What Powers the Load? What's the Definition of Voltage, what's the Definition of Current? How do you "Generate" a Voltage? How do you Pump a Current? 

 

The Simpletons out there can not focus on simple things! They are just Community Noise! Filling the Internet with Non-Sense!

That's why we are Light Years Ahead:

PROOF, LOGIC, and the evidence they try so hard to dispute! Uselessly!

 

Do you remember this:

Many here laugh at, and mok EMJ, but the fact is , he is basically right in what he is trying to put forward.

Ref: Tinman telling you I am correct

 

 

We have shown everyone how its done, with massive trail of Evidence! Evidence like NEVER Before!

 

YET...

 

We still see some, idiots that cant see the Evidence! Do you see how STUPID these people are? Do you see how Dumb they are! Do you see how Useless and how much of a waste of Space they are?

Dumb Asses!

Best Wishes,

   Chris

  • Liked by
  • Aetherholic
  • Augenblick
Jagau posted this 12 September 2022

You are absolutely right Chris.
I wonder what is he doing on this forum?
He is exceptionally arrogant, he acts like a genius and knows everything.
He destroys most of the good ideas that the young researchers of this forum try to do, he crushes them immediately to show his superiority. In addition he is very impolite to those who made this forum what it is today. That's one of the reasons I don't participate in this forum.
Anyway tell me if he does anything experimental?
Just dblah blah with copying in the e-books that are found in abundance on the internet.
With all the free energy experts who have succeeded and patented things,  he should go back to school

Jagau

  • Liked by
  • Chris
  • Augenblick
scalarpotential posted this 13 September 2022

Hi Chris, I agree. I'm a slow learner, but I'm beginning to see the point of magnetic resonance. The reason for mentioning Cap Loz is the video posted above, I went to his channel to see the latest video and there he made some statement regarding the load. This was the video:

Best Regards

  • Liked by
  • Augenblick
  • Chris
Chris posted this 15 September 2022

My Friends,

Total Non-Sense Floods the Free Energy Community! Like Bots flood Twitter, we see the same thing!

95% of what is posted is total nonsense, total rubbish!

Did you see this:

 

This truly is how Free Energy Machines work! Like I said, its just the start, MUCH better can be achieved!

Best Wishes,

   Chris

  • Liked by
  • Aetherholic
  • Augenblick
Chris posted this 22 September 2022

My Friends,

The Trolls threaten Law Suits for calling them out! They don't like to be Identified for their actions!

Who Manages the Trolls, who is their Handler?

Why would anyone Join an Energy Research Forum to only create Havok? Are people really that board with that much time on their hands, or do they have an Incentive to create Havoc?

Trouble Makers in the Community should always be identified and called out! Humanity should not ever have any Trouble Makers! This is the ultimate definition of: Treason! It is Treasonous to Betray or Impede Scientific Progress!

Is there any Evidence to show we could have a Troll Problem, Bought and Paid for Shills to destroy the Community:

Ref: Telegrama / Telegram Figuera 1902.

 

The above was a telegram sent by Figura to say that the Bankers has bought his technology! What happened then? It was shelved and never seen again! I also believe they changed some of the patents, even destroying some records, this is just my belief and I can not prove this.

 

This information was bought to light by: General Flynn:

Ref: Former Apostolic Nuncio to the US, Arch Bishop Vigano’s open letter to President Trump warns of a ‘Great Reset’ plot to destroy humanity.

 

The following letter is from: Carlo Maria Viganò Titular Archbishop of Ulpiana

Please take a minute to read this carefully:

Ref: TO THE PRESIDENT OF THE UNITED STATES OF AMERICA DONALD J. TRUMP

 

This information is critical to read and understand! The world, the entire Globe is at war with Evil, we must at all costs win! The end of the Age is upon us and with the end of the age, the forces of good and evil are fighting for Control of the new Age.

Do you think Energy Independence is the Goal of the NWO? What's the research say?

 

Hmm, not looking good is it!

There will always be the:

 

Always, they will be easy to spot! Always they will stick out like sore thumbs! Always they will be Deceptive and Misleading and very Dumb even if they try their utmost to appear Smart, they are far from it! If they were Smart, they would have solved the Worlds Problems already, instead of being a Parasite on Energy Forums Globally! Of course, we Ban them and they will never have the slightest chance here!

Think for yourselves, and base all emotions and beliefs on Facts and Facts only! Don't just believe me, do the research for yourselves! Do the Experiments for yourselves:

 

Study the whole Series, it will all make perfect sense!

I have given you all you need, freely and clearly! Its all right here, on the most advanced Energy Research Forum in the World! We are truly Light Years Ahead!

Best Wishes,

   Chris

  • Liked by
  • strape
  • Augenblick
Chris posted this 24 September 2022

My Friends,

Is anyone reading what's going on here: https://www.overunityresearch.com/index.php?topic=4261.325

Two Pages of it...

Only One Person posting anything worth while! Only One Person progressing! OMG!!!

Best Wishes,

   Chris

  • Liked by
  • Shadow_
  • Augenblick
Chris posted this 25 September 2022

Hey Solarlab,

Regarding your post:

Rather than waste this "double post dot space", here's an OT for

Chris over at "Aboveunity.com"

Thanks for checking in, hope you're enjoying "excess energy" for real!  <img src=">

---------------------------------------------------------------------------
 Chris posted this 7 hours ago - Last edited 4 hours ago

My Friends,

Is anyone reading what's going on here: https://www.overunityresearch.com/index.php?topic=4261.325

Two Pages of it...

Only One Person posting anything worth while! Only One Person progressing! OMG!!!

Best Wishes,

   Chris
------------------------------------------------------------------------------

Still waiting for you guys to show us all how it's done! You know - "Light years ahead"

Have a good one...

SL - Solarlab - you know - the guy you banned for suggesting the use of CAE as a design tool    <img src=">

Sorry Chris, but I couldn't help myself:
https://www.aboveunity.com/thread/continued-failure-of-electromagnetic-simulation/?order=all#comment-225e3a92-b7eb-4d6d-8211-aee401746440
Hey, if your so convinced about the "Continued Failure of Electromagnetic Simulation" - how come it actually works - oh well! Maybe, RTFM.

 

Ref: Holcomb and other FE technology debate

 

Mate its good to see you progressing! Well done!

We have already done it! I need NO help! Nice to see you so confident though! 

I posted this in 2015: Here, which is what you're finally reached now. Not bragging, only pointing out, you're a decade late to the party.

We have already shared what's required, and have shared it in the simplest possible form, A Real Free Energy System, with Unlimited Free Power, already, weather you believe it or not, that's up to you!

Here it is:

 

We have many, many Independent Replications World Wide now!

Again, once you understand this, its very easy! We here at aboveunity.com already have shared the simplest form of Free Energy Machine, right there and we have had it for over a decade now! Some here have had machines running for only for a few years or so.

Wouldn't it be great to have a Team that worked with you instead of against you! We have just that here! We Ban Trolls! We only allow Members here to work on the same Energy Tech, no Time Wasters!

Solarlab, I wish you well, and I am pleased you were able to make some progress after all this time, lets see where this takes you and we will find out if your eager attitude with SIM works the same on the Bench!

Best Wishes,

   Chris

 

P.S: What do you make of this:

Ref: Holcomb and other FE technology debate

 

Always threatening Law suits! On what grounds I wonder? Libel, WHERE? I have not slandered anyone! I have not Damaged anyone's Reputation! I have not Injured anyone!  Why so many threats?

 

P.P.S: We parted ways Solarlab because we had already achieved the goal and you were not paying any attention to it. We already had the answers you were still looking for, so we parted ways. This post Here is the reason we parted ways! Bench Work is the path forward, not spending all day every day inside faulty Computer Sims!

 

  • Liked by
  • Melendor
  • Augenblick
baerndorfer posted this 25 September 2022

hi chris,

i don't know how far others have come in the last months because i focused only on what is happening right in front of my eyes. i did some realy successfully tests with the POC thing - meaning i reached OU several times but run into a big problem. the problem is to measure the current which comes out of the POC in some situations. 

what did i mean by that...

when we have magnetic resonance in a core and extract energy from this system with POC the current is not present as a voltage drop on the shunt! the load is still working and we can measure a potential difference but there is no significant current measureable. this energy is different for some reason.

because of that fact i went to measure the light, which comes out of my load (LED array). we did this in a professional studio btw and got the emitted energy from LED in lumen (lm). because it is no problem to measure what we put into a system we can now compare our circuits with professional build led-engines. and it is absolutely no problem to get +15% more than we put in.

everybody who reaches magnetic resonance will run into this same thing when it comes to current measuring.

have a great day!

  • Liked by
  • Chris
  • Augenblick
thaelin posted this 03 October 2022

   Had to see it. I run an 8 core and the site pegged on of the cores to 100%. Did it twice to make sure. Wonder if he is sending scripts or something. Might do a packet sniff on the site some time.

thay

 

  • Liked by
  • Chris
  • Augenblick
Chris posted this 09 November 2022

My Friends,

It appears there are quite a few people trying to take credit for Aboveunity.com's progress!

These try hard's, shills, really have no idea whatsoever, and they appear to slowly fall on their Sword!

Karma!

I posted this over 2 years ago:

 

And just recently, actually today, saw two different post's that try's to take credit for this very same amazing breakthrough!

Plagiarist Clowns!🤡

Oh my, Humanity has a long way to go before they can play in the Big Kids Play Ground! A small percentage of the population are just Plagiarist Buffoons'!!!

I have been posting videos about how this technology works for over a decade! Yet we see Plagiarists trying to take credit for Our Work!

I think Nikola Tesla said it best:

 

 

FACT: Bucking Output Coils, or Partnered Output Coils are the only simple cheap path forward, and everyone knows who introduced them to the community!!! Fakers and Thieves are already known! Shills are easy to spot!

Best Wishes,

   Chris

  • Liked by
  • Jagau
  • Augenblick
Chris posted this 14 August 2022

My Friends,

There you have it: Extra energy in a capacitor - Oh Really?

 

Ok then...

Some have no idea what so ever how Energy Works! WHY? Why don't people study intently, how Energy works and where it comes from? Before they proclaim Guru Status, preferably! Then they may realise how silly this is!

 

Grow!

Best Wishes,

   Chris

  • Liked by
  • Augenblick
Melendor posted this 18 August 2022

My Friends,

The truth is, www.aboveunity.com is the only forum in the world with answers to the Energy Crisis! No one else is even close! They are a million miles away off chasing rainbows!

I have given the complete Operation in the Thread: Chris's Non-Inductive Coil Experiment and given you a demonstration in Video Seven.

Best Wishes,

   Chris

Hey Chris.
I re-watched video 7 and I always find things that I missed last time.
Thank you.

I can not find the information right now , where you said that AKULA and DON , used 4 - 7 turns as a Trigger of thick wire gauge.

Is there a downside to this ? 
7 turns primary and 300 turns secondary ?
Or should we stay locked to 1/4 wire length ALWAYS ! ?

Thank you man .
I will find time to post also my small experiments.
Stay Safe
!!! Melendor the Wizard

  • Liked by
  • Chris
Chris posted this 08 September 2022

My Friends,

This is Gold! 

I spent quite some time reading about the efforts of Don Smith from his own literature and various forum threads. Read, re-read. Watched some YouTube videos. Pored over images of the various DS devices. It didn't make much sense until something clicked. What follows is my interpretation of what is happening.

In a capacitor, the energy stored is E=(CV^2)/2. If you increase voltage by 2x then the energy increases by 4x. There is clearly a benefit in terms of energy output to boosting the voltage as high as you can go so long as you can minimise the input energy.

In a series resonant RLC circuit the voltage accumulates each cycle. Take the example of a 10nF capacitor paired with a 1uH inductor. If the input voltage is 5V, then the voltage of the capacitor at the end of cycle 1 would be 5V, cycle 2 = 10V, cycle 3 = 15V and so on. After 10,000 cycles the voltage would be 50,000V, which is 12.5J if you discharged it at that point. If, however, you charge and discharge each cycle then the total cumulative energy discharged would total 0.00125J. For the same input energy.

Taking this example a step further, the resonant frequency is 1,591,549 cycles/sec. This means that you can 'buffer' the energy on the capacitor in 159x 10,000 cycle batches per second, discharging each batch separately. 159 x 12.5J = 1987.5J (per second), which is 1.99kW.

Have I got something wrong? I'm happy to be educated.
 


The trap is to consider that to go from 5v to 10v, no more energy is needed than to go from 0 to 5v.

Each time the voltage goes up, it takes even more energy to increment the voltage by the same step voltage.

To go from 0 to U1 = 5v, it takes a power 1/2*C*U1² = 1/2*C*U1² = 12.5*C.

To go from U1=5v to U2=10v you need 1/2*C*U2² - 1/2*C*U1² = 1/2*C*( U2² - U1² ) = 37.5*C, which is 3 times more power than in the first step.

To go from U2v=10v to U3=15v you need 1/2*C*U3² - 1/2 * C*U2² = 1/2 * C* ( U3² - U2² ) = 62.5*C, which is 5 times more power than in the first step.

And so on. At each step, the load current must be produced at a higher voltage than the one we arrived at, so the power required, product of the voltage by the load current increases at each step too.

Ref:  Resonance energy methods - Don Smith revisited

 

Can anyone tell me why this is total nonsense and does not hold water at all?

 

It amazes me how silly assumptions can make such a mess in a completely Logical situation! The ability to Engineer a way out of a Paper Bag seems further and further away!

Best Wishes,

   Chris

  • Liked by
  • Augenblick
scalarpotential posted this 13 September 2022

My Friends,

This is Gold! 

I spent quite some time reading about the efforts of Don Smith from his own literature and various forum threads. Read, re-read. Watched some YouTube videos. Pored over images of the various DS devices. It didn't make much sense until something clicked. What follows is my interpretation of what is happening.

In a capacitor, the energy stored is E=(CV^2)/2. If you increase voltage by 2x then the energy increases by 4x. There is clearly a benefit in terms of energy output to boosting the voltage as high as you can go so long as you can minimise the input energy.

In a series resonant RLC circuit the voltage accumulates each cycle. Take the example of a 10nF capacitor paired with a 1uH inductor. If the input voltage is 5V, then the voltage of the capacitor at the end of cycle 1 would be 5V, cycle 2 = 10V, cycle 3 = 15V and so on. After 10,000 cycles the voltage would be 50,000V, which is 12.5J if you discharged it at that point. If, however, you charge and discharge each cycle then the total cumulative energy discharged would total 0.00125J. For the same input energy.

Taking this example a step further, the resonant frequency is 1,591,549 cycles/sec. This means that you can 'buffer' the energy on the capacitor in 159x 10,000 cycle batches per second, discharging each batch separately. 159 x 12.5J = 1987.5J (per second), which is 1.99kW.

Have I got something wrong? I'm happy to be educated.
 


The trap is to consider that to go from 5v to 10v, no more energy is needed than to go from 0 to 5v.

Each time the voltage goes up, it takes even more energy to increment the voltage by the same step voltage.

To go from 0 to U1 = 5v, it takes a power 1/2*C*U1² = 1/2*C*U1² = 12.5*C.

To go from U1=5v to U2=10v you need 1/2*C*U2² - 1/2*C*U1² = 1/2*C*( U2² - U1² ) = 37.5*C, which is 3 times more power than in the first step.

To go from U2v=10v to U3=15v you need 1/2*C*U3² - 1/2 * C*U2² = 1/2 * C* ( U3² - U2² ) = 62.5*C, which is 5 times more power than in the first step.

And so on. At each step, the load current must be produced at a higher voltage than the one we arrived at, so the power required, product of the voltage by the load current increases at each step too.

Ref:  Resonance energy methods - Don Smith revisited

 

Can anyone tell me why this is total nonsense and does not hold water at all?

 

It amazes me how silly assumptions can make such a mess in a completely Logical situation! The ability to Engineer a way out of a Paper Bag seems further and further away!

Best Wishes,

   Chris

Can't follow the question, but I must admit the answer isn't wrong, a cap is analogous to elastic compression, the further you go (comparable to voltage), the more energy you must put in to compress further.
There's no AU in caps, only in watercaps when you go for ampless dielectric breakdown.
Didn't Captain Loz revise his results?

  • Liked by
  • Augenblick
Chris posted this 13 September 2022

Hello Scalarpotential,

Your Question:

Didn't Captain Loz revise his results?

 

 

No is the answer!

Captainloz got tired of being Harassed by Intellectually Disabled Morons!

Why would you even put this question out there with no supporting data? I get tired of seeing this sort of thing! It is nothing but wrong! If you don't have the facts, please stop posting this sort of thing when it is False! I have seen so much of this Fakery from the Trolls, it really annoys me! They Lie through their teeth! The community is filled with Lies and Fakery!

Perhaps you should get the Bench cleaned off and do some experiments?

 

Moving on: The question exists on the thread: Resonance energy methods - Don Smith revisited

Don Smith used Coils and Capacitors, along with a Spark Gap, to "Generate" Excess Energy.

Don's Input was not affected by Load!

Don's Battery actually Charged while the machine was in Use!

There was Zero RLC Resonance in Don's Machines! Don Refers to Magnetic Resonance and actually states that several times!

Don's Output had no effect on the Input! So the question, the answer given above by f6flt, is totally wrong and does not hold water! This does NOT APPLY in this machine! But because f6flt has no idea what so ever, how these machines actually work, I cant expect him to know why this does not apply!

Reciting, or copy pasting Science that has no bearing on the machine under observation, is at best: Poor Science and Misleading!

10% of the community are nothing but Trolls, they Lie, produce nothing but Fakery, shill the community and totally mislead others with Bullsh*t! Some, intellectually disabled morons follow these Humptys like they are Gurus, its pathetic! Think for yourselves, please! It is disgusting to see! People turning into Cabbages in the presence of Try Hard Guru's!

Best Wishes,

   Chris

  • Liked by
  • Augenblick
Chris posted this 23 September 2022

OH MY,

The Trolls are rolling out the Shill Power against others that are making Progress! Its getting really obvious, again, who is involved in the Group of Trolls over on the other Forum! Of course that would never happen here! I would just Ban the traitors for good!

They don't come here, because they know, they have already lost here! I will just erase their presence here and Ban them!

That's why we are the safest Forum in the World: Moderation!

You get to come here, do your research and contribute Freely as a Valued Member! Free of any Disturbance and Trolling! We have Eliminated Trolls Entirely!

Its only stupid people that keep making the same stupid mistakes!

We continue to Progress, every day, while they are still stuck discussing the same ol rubbish they were discussing when they started doing this: Zero Progress! A Statistical Impossibility!

 

Think about that for a while!

The Haters, the Bought and Paid for Shills don't get to have a place in History! We are wiping them out slowly but surely! Exposing their Antagonist Shillabery!

Best Wishes,

   Chris

  • Liked by
  • Augenblick
Chris posted this 01 October 2022

My Friends,

Normally, I would avoid this, but this persons antics are just so HALARIOUSLY FUNNY, I wanted to bring this to your attention!

BANNED and Disgraced, Ex-Member, Fighter, which I banned for Wronging the Community and myself, after I said no, he could NOT have a copy of My Database, and not to scrape My Website, and he did anyway against My Wishes, taking My Website Down for almost a Week, is still having Terrible Days!

 

There is a post on his Copied Website, that this video was posted to, which shows just how Upset he is!

 

He has spent a lot of time complaining about me actually! This is a very tiny part of his continued Complaining and continued Antics!

I wonder if this very Sad Individual understands why, the same open source software, is faster on his system, than mine? Does this very sad individual understand what a VPN is? Or why his country has been bandwidth Limited for this very reason!!! We don't want to serve Content to Content Thieves, do we!

Oh my Goodness, the Desperation Grows tremendously!

What a very sad, very scorned, upset Individual!

Catching this BANNED and Disgraced, Ex-Member, doing the wrong thing was the best thing I could have done with this BANNED and Disgraced, Ex-Member! Getting rid of his Very Bad Behaviour was the best thing I ever did! Wronging the Community, and me, was his undoing, and he hates that he was caught doing the Wrong Thing! 

Read all about his Antics here:

Aboveunity.com Site Scraping

 

Now he spends all his time Copying My Website! Poorly BTW! He has Terrible Content, and what Content he does have is an almost exact copy of Mine, thus the reason he wanted to Scrape My Website! So, its not even his Content!

He has nothing! Zero Experiment, Zero Technology! Never had anything! He also tried to copy My Partnered Output Coils and make them his Own Also, hilariously failing!

I am not going to post a link to his copied website, its something like: www.BeyondStupidity.rom, because its best if we Ignore the stupidity I think! However, I think its very funny watching BANNED and Disgraced, Ex-Member's, behaving Badly!

Best Wishes,

   Chris

  • Liked by
  • Augenblick
Chris posted this 03 October 2022

Hi Thay,

Yes, BANNED and Disgraced, Ex-Member, Fighter, which I banned for Wronging the Community and myself, does some coding for a living. Apparently. So its easy to off load all the Server's Serving to the Desktop and render as much content on the Client Computer, but why would you? 

BANNED and Disgraced, Ex-Member, Fighter, has simply compared Apples and Oranges! A real testament to his real IT Skills and poor judgement!

So many Members and Researchers have so many better things to do! Don't they?

BANNED and Disgraced, Ex-Member, Fighter, is just showing the Community, how much of a time waster he really is! Truth is definitely not his strong point! Facts, he has none! He lives in a lolly shop trying to sell bad lolly pops!

Best Wishes,

   Chris

  • Liked by
  • Augenblick
We're Light Years Ahead!
Our Above Unity Machines:

Asymmetrical EMI

Wistiti's Bucking Joule Thief
Non-Inductive Coil Experiment
CD's Non-Inductive Coil Rep
Baerndorfer's Experiment
Captainloz's A-R-E
Aetherholic's COP>4.0

Resonant EMI

Yo's Ferro Resonance
Jagau's Non-linear Resonance
Ferrite at work
Recomended Protocol:
Measurement
Switching System
Measurement Block
Current Observation
Current Sensing Resolution
Members Online:

No one online at the moment

What is a Scalar:

In physics, scalars are physical quantities that are unaffected by changes to a vector space basis. Scalars are often accompanied by units of measurement, as in "10 cm". Examples of scalar quantities are mass, distance, charge, volume, time, speed, and the magnitude of physical vectors in general.

You need to forget the Non-Sense that some spout with out knowing the actual Definition of the word Scalar! Some people talk absolute Bull Sh*t!

The pressure P in the formula P = pgh, pgh is a scalar that tells you the amount of this squashing force per unit area in a fluid.

A Scalar, having both direction and magnitude, can be anything! The Magnetic Field, a Charge moving, yet some Numb Nuts think it means Magic Science!

Start Here:
Help with using the Forum.
Message from God:

Hello my children. This is Yahweh, the one true Lord. You have found creation's secret. Now share it peacefully with the world.

Ref: Message from God written inside the Human Genome

God be in my head, and in my thinking.

God be in my eyes, and in my looking.

God be in my mouth, and in my speaking.

Oh, God be in my heart, and in my understanding.

Your Support:

More than anything else, your contributions to this forum are most important! We are trying to actively get all visitors involved, but we do only have a few main contributors, which are very much appreciated! If you would like to see more pages with more detailed experiments and answers, perhaps a contribution of another type maybe possible:

PayPal De-Platformed me!

They REFUSE to tell me why!

We now use Wise!

Donate
Use E-Mail: Chris at aboveunity.com

The content I am sharing is not only unique, but is changing the world as we know it! Please Support Us!

Thank You So Much!

Browse by Category:
Weeks High Earners:
The great Nikola Tesla:

Ere many generations pass, our machinery will be driven by a power obtainable at any point of the universe. This idea is not novel. Men have been led to it long ago by instinct or reason. It has been expressed in many ways, and in many places, in the history of old and new. We find it in the delightful myth of Antheus, who drives power from the earth; we find it among the subtle speculations of one of your splendid mathematicians, and in many hints and statements of thinkers of the present time. Throughout space there is energy. Is this energy static or kinetic? If static, our hopes are in vain; if kinetic - and this we know it is for certain - then it is a mere question of time when men will succeed in attaching their machinery to the very wheelwork of nature.

Experiments With Alternate Currents Of High Potential And High Frequency (February 1892).

Close