Ide Osamu's contributions to free-energy community.

  • 686 Views
  • Last Post 1 weeks ago
Miska posted this 07 October 2026

Dear Friends,

Here, I would like to present Ide Osamu, a pioneer of free-energy research in Japan.

Ide Osamu known as an inventor of free-energy device called D51 in Japan made a presentation at ICECET in 2022. First I would like to post a video clip uploaded by Ide to the internet and a summary of the presentation made by him. Please scroll down a bit and push the play button as the first few seconds is black screen as if there were no video clip.

 

Here are documents related to the above presentation: Ide Osamu’s presentation at EECTI in 2022 and Ide Osamu’s presentation at ICMAME in 2023 

Ide,Osamu,”Unusual Efficiency of the Resonance Transformer”. ICECET

https://ieeexplore.ieee.org/document/9873087

He is a rare case of being able to register free-energy phenomena in academic journals and bringing it to light otherwise categorized as a fringe science, but little known among like-minded folks outside of Japan. So, I would like to introduce a brief biography of him and his contributions to our community. His remark that he could not figure out theoretical explanation of the phenomena reflects his own nature of honesty as a good scientist. I was so impressed that I thought this person is trustworthy. 

1. Ide, Osamu’s contributions to our community

Ide, Osamu is known as the most promising inventor of free-energy device in the community of like-minded folks in Japan. He claimed that he had built self-powering electronic generator that realized COP 400%. Plural third parties researcher have reported that their replication of his device had produced positive results, which include foreign and domestic scientists. He has made two main contributions in the field of free-energy. The first is that he registered official records of free-energy phenomena in academic journals, which means that academic communities admit that free-energy exist. Owning to him, a laboratory of free-energy has been established at an university in Japan.

Secondly, he has found out at least necessary conditions in order to produce free-energy with a device presented in the below graph:

graph

(I inserted lines of detailed information in the original graph.)

The three conditions are as follows:

1. The device shows higher performance using a spike wave as I/P drive compared to using a square wave that contains a DC component.

2. By utilizing a repulsive magnetic field (non-inductive coils) in the transformer's magnetic structure, the device shows higher results.

3. Using fast spike waves with short repetition periods results in a more efficient O/P than using spike waves with long periods.

He somehow achieve Above-unity in that sense he is more a great artist than a typical scientist. 

 

2. His biography in relation with his inventions

1970:

Ide Osamu grraduated from his university in1972 and started his career as an engineer in Research & Development Center of Tokyo Electric Power Compan.

1972-1984:

In his early days he was inspired by EMA motor invented by Edwin Gray and had a thought that he had to replicate this invention. EMA motor is a kind of self-powering motor driven by Above-unity. He met in person Edwin Gray and Richard Hackenbecker of EV Gray company. He not only travelled to U.S. for inspection of EMA motor but also was shown a prototype of static generator privately by Hackenbecker. There was a mood in U.S. that inventions like them were oppressed by U.S. Authority. Hackenbecker hoped that Japan would be a sales market for their products. Invention of EV Gray did not make it as a product and Edwin past away in despair.

Ide is an unintentional successor of the will of Edwin Gray. What he heard and his findings of EMA motor were like below:

- The study of the motor is inspired by that of Nicola Tesla,

- This motor consumes power for only two or three hundredths of a second, the duration of the capacitor's discharge.

- The input is 1,314 watts, and the output is 1,550 watts.

- The motor is cooled by magnetic vacuum.

- The motor produces sparks.

- The basic principle of the motor is magnetic repulsion that plays a role in its operation: using power from a capacitor.

1984:

Ide joined and found Clean Energy Laboratory and began his own research of free-energy. He first tried to replicate the motor and achieved a slight Above-unity and switched his project to the invention of device without rotor.

2000-2011:

A prototype of hyper-efficient inverter was invented and gradually achieved Above-unity from 140% , 270%. to 400%.

He says that rigging is not noise but source of free-energy.

He refers to D. Lindström’s paper on cold currents

2015:

He succeeded in producing self-running electronic generator and named the device, D51 after the name of a famous Japanese steam locomotive, which defies Ohm’s law and increase O/P power according with the increase of load. The generator can power electric motors. He suspects a third electromotive force being generated inside the motor. He is ready to write an academic paper on this theme but hesitates to submit it to Physics society because it is obviously expected that its stubbornness reject the direct expression of free-energy.

2016:

Third parties have proved the authenticity of his early works.

Horst Eckardt, Bernhard Foltz, “Replication of the Ide Transformer Device”. 2016. Unified Physics Institute of Technology

https://mail.upitec.org/documents/uft/IdeCircuitRepl.pdf

Replication of the Ide Transformer Device 

EOR

Attached Files

Order By: Standard | Newest | Votes
FringeIdeas posted this 08 October 2026

Miska

Thanks! interesting stuff. Would it be possible for you to check a few links though? The presentation links:

Ide Osamu’spresentation at EECTI in 2022 and Ide Osamu’spresentation at ICMAME in 2023 

I'm getting a 404 not found, for those. I think I found the 2023 pdf online, but can't find anything for 2022.

Please and thank you.

Marcel

Chris posted this 08 October 2026

My Friends,

This is an exact copy, even down to diagrams: https://patents.google.com/patent/US20130009625A1/en

https://patentimages.storage.googleapis.com/e6/d1/1c/df0dc76f0754cc/US20130009625A1.pdf

Its no wonder why this field never advanced in the public domain.

 

Everything, before this patent was issued, was here or in my posts else where: 2011, here is 1 example

 

Some days, I feel a bit like this:

 

I should be more positive, this is essentially a verification of the work I have shared for decades, work that keeps seeing more and more verifications as time goes on, and work that the Goon Squad failed to stop from getting into the Public Domain. The more the better really, I do get a bit tired of the Wanna Be Heros that use others work to get a leg up!

Best Wishes,

   Chris

Miska posted this 08 October 2026

Friends, 

Sorry it seems that unexpected things happen while I am trying to post the reply below and my post seem to be duplicated in the wrong way. So, I edit the first post, the wrongly duplicated one this way.

Best wishes

Miska

Miska posted this 08 October 2026

Hello Fringeideas, Hello Chris,

I am sorry for bothering you with the files. You are right. I found out that their errors are related to the layer's hierarchy of the file manager where I put those PDF files previously. I put them at the higher sub-layer and insert them below successfully. This time it seem to work well. I hope this will help you. Let me know if there still is a problem downloading the files. Anyway thank you for your attention.

Ide Osamu's presentaation at EECTI in 2022 

Ide Osamu's presentaation at ICMAME in 2023                  

I have attached the files to the original main text, too. Using the "Attach" button. Now they appeared at the bottom of the text but their names seem to be changed. 

Best wishes,

Miska

 

 

Chris posted this 08 October 2026

Thanks for sharing this Miska, I was not aware of Ide Osamu!

Miska posted this 08 October 2026

You are welcome. I think that it is no coincidence that I found your internet site by keywords used by Ide in his research paper.

FringeIdeas posted this 10 October 2026

@Chris yes, interesting how much is resembles what this forum covers, thanks for sharing the patent links. Kind of expected it to be honest. But like you said, just more verification of what you have been saying. Strange though, from his 2023 presentation, that picture, his coupling is so loose. It kind of reminds me of Melnichenko. Btw, that video you posted is set to private, not sure if that was deliberate or not.

@Miska thank you for re-posting the files! Good stuff. I also had not heard of this man. 

Thanks!

Marcel

Miska posted this 10 October 2026

Hello Marcel,

You are welcome! It seems to me there are lots to learn for me.

Best wishes,

Miska

Chris posted this 11 October 2026

Hey Guys,

This link has a lot of good content: https://www.growkudos.com/profile/osamu_ide if you follow the messy links away from the page.

Here is one of the videos, same as Miska shared, but the original version:

 

I saw another, but it looks to be just a portion of this video? Not sure.

Anyway, have fun, ALL the content Osamu Ide provided is almost an exact copy of the information I have already here in these Pages and in posts before this forum was started here: "overunity.com now https://www.overunityarchives.com/index.php (Partnered Output Coils - Free Energy topic has now been deleted)", "https://www.overunityarchives.com/index.php?topic=7181.0" and Here: "https://www.overunityresearch.com/index.php?topic=2760.450"

 

I knew over time the topic would get deleted from that forum, it its a topic that shows how bad the Trolling and Control over Researchers really was. That is, until I made them all Obsolete!

Lew me show you something:

I have all posts from all Members, here is another:

 

What these people have done will be seen for many Eons to come, sold Humanity out and robbed Humanity of its future for so long! These people, the Goon Squad, they are Criminals!

I have tried to give all of Humanity all I know, and stay alive, and if my Research is correct, Osamu Ide is no longer alive? Maybe someone can confirm?

Our world has been Hijacked by Idiots, Satanist Idiots, and no one has really done anything about it. When Jesus comes back, I hope he can see I tried to do the best I could.

Best Wishes,

   Chris

Miska posted this 11 October 2026

Hello Chris,

Thank you for your information. It is always surprising to know unkown histories. 
Well,  as far as Ide’s survival is concerned,  it is highly possible that he has been alive at least until the beginning of 2025. He published a revised edition of his 2011 book in 2025 and there was no mention of his demise. Also, since he is so famous within the online community in Japan, that  if he passed away it could not but its news appear soon after, yet I haven't heard any such. If he is alive, he become around 79 year old.

Best wishes,
Miska

Chris posted this 11 October 2026

Hey Miska,

I must apologise, my assumption was based on this: 

 

Ref: https://patents.google.com/patent/US20130009625A1/en

Best Wishes,

   Chris

Miska posted this 11 October 2026

Hey Chris, 
No problem. I also was  hardly able to believe my eyes when I saw the notice of Japanese patent office telling his patent invalidated because of unpaid pension contributions. It was a few years ago.
I thought that he dedicated everything in his life to his research and forced to lead a humble life even now in his later years. Actually I am thinking about finding out his or his successor's contact info and make them know your activities, try to explain "Lentz-law variant" as far as I could !
The name of the game is whether or not they are willing to listen.
Best regards,
Miska

Chris posted this 2 weeks ago

My Friends,

Miska has provided a very important affirmation to the work here on my web pages. This Technology works, and anyone denying what I have shared and others have shared proved Humanity suffers from excessive Ignorance.

I have lost motivation, I am not posting like I used to, because as I see it, the future of Humanity is very quickly going down the Dunny! I cant be bothered sharing information with Humanity if Humanity insist in being Idiots.

We have a small number of interested people here, and most of them have a very good grasp on this technology. They have what I have, just at a different level. One day soon, they will be at my level, if they are not already! So this is not going to go away!

Humanity will split, I can see it clearly now. We will have the dummies, lead to the guillotines by their governments, and the second half, we will oppose the governments, we will survive!

Best wishes

   Chris

  • Liked by
  • Drasko
FringeIdeas posted this 2 weeks ago

Chris, just don't take down the site 😄

Seems to be a lot of crazy stuff going on in the media. On purpose maybe, scare tactics I think. Hacked refrigerators, Iran bombings, etc. Seems the powers that be are gearing up for something. Amazing though that the suppression of this technology not only gives them power, but gives them the ability to F with us. E.g. the scare tactics. Sad.

I've still not found any bench time lately, but hopefully soon. Still trying to read and ponder when I can though.

Hope others are still studying and progressing!

Marcel

  • Liked by
  • Chris
  • Drasko
Luminerix posted this 2 weeks ago

 

Chris - 

 

I realize your fatigue, you have put a lot of work and energy into doing this.

Personally, I have put 3 years into this work and that is not so much compared to all the others, and I did not have that decisive OU setup yet.

To me, this does not seem so easy as it appears to you.

I did get two effects that I am sure are OU, but I can not claim it because the measurements are not robust.

And in any case, I am doing a couple 100 mW, which is not useful anyway.

And to put the goal post somewhere for me, the gold standard is a self looping system that sustains itself and a load however small.

But I will keep going. Very impressed with the rotary setup drachonite has presented- I just simply don't know how to replicate this, even if I understand the reasoning of bucking coils.

I would say this: Aside from malicious trolls, that are certainly everywhere, this is not quite as easy as you perceive it and I myself have not been able so far to get a self looping setup. 

I strongly suspect that this is not even primarily a problem of producing a scalar effect with a bucking coil or some the resonance setup, an the issue of harnessing that excess power to make the system self loop.

But I will keep going.

Chris posted this 2 weeks ago

Hey Luminerix,

Thanks for the support and encouragement! @Marcel, thanks also, I wont.

The key is Magnetic Resonance, each Partnered Output Coil must be 180 degrees out of phase, equal in magnitude, and once you have this, the rest falls into place. Load is important in early experiments, not too much, not too little. Finding that happy medium is important in the early stages.

I agree: "the goal post somewhere for me, the gold standard is a self looping system that sustains itself and a load however small" this is an important goal for all!

Hint: There is nothing to say we cant have two input coils, one wound over each POC, exciting both Partnered Output Coils, to "Generate" the same voltage in each POC at the same time! Because Current I = Voltage V / Resistance R, then the Optimised Frequency can be searched for easier.

The reason I show one coil in the Image:

 

I did show two input coils in an early Video:

 

 

I made this video private after a bunch of stupid infighting by Moronical Goons and others stealing the video and claiming it as their own and not giving any credit.

NOTE: You must have 2 to 5 times more turns on the POC than the input coil, and the input coil must be current limited so as to not over drive the input.

We have lots of good Members here, and I thank you all from the bottom of my heart! We have had a very tough run to get to here, so many thoroughly horrible people, some, just pure Evil, but we seem to be past the worst of it now! This Technology Works! Play around, add a Capacitor if needed, get the Voltage up, and the Magnetic Fields will follow! When you have the Magnetic Fields, then you will have Power Density.

Best Wishes,

   Chris

  • Liked by
  • Drasko
  • FringeIdeas
Drasko posted this 2 weeks ago

Chris,

The information you have shared here on this site is evolutionary. 

Not all will grasp it, and thats OK, but give it time and they will.

I my self have found that this world purposely creates obstacles and distractions to distract us from whats actually important.

Never give up brother!

I support what you do and stand by you !

 

Drasko.

 

  • Liked by
  • FringeIdeas
  • Chris
FringeIdeas posted this 2 weeks ago

Chris,

Did you mean to set your video to public for this post? I'm guess not.. anyway, thoughts.

The double input is something I've thought about before. And more so after this Osamu thread started and I saw it in his work.

In the original POC experiment, I had the input coil wrapped over POC1 that had the diode set in a manner where it would not oppose the input, but oppose the other POC2. A small concern was that POC2, across the core, was engaging with the input when the input was ramping up. Wasted energy? Causing timing issues?

Maybe two inputs corrects those issues, if they really are issues.. 

 

 

Edit: I think I got my applied voltage + and - on the input coils wrong.. switch them in your imagination.

So if two inputs were used.. Input 1 fires, POC2 would want to engage (as I described before) because of the diode direction, but could not this time because the magnetic field from input 2 would be stronger and closer, more influential. Even though the POC2 diode would not allow current to run. So both POC coils are effectively out of the equation until the input coils turn off. 

Of course then we have input 1 opposing input 2, but I think what happens during that short rise time, cores gapped and durin magnetization, etc, is possibly something that can be handled.

Anyway, just thoughts. I need some bench time. 

Marcel

  • Liked by
  • Chris
  • Drasko
Chris posted this 1 weeks ago

Hey Guys,

Thank You! Yes sometimes we are forced to do things that we don't want to do for many different reasons. Yes I agree, we have had many obstacles and distractions!

 

The Dual Input Coils, which Floyd Sweet did use, we just can't verify his exact configuration, has one big benefit, both POC are bought up to the same Voltage at the same time! This encourages Magnetic Resonance, because both POC's already have the same Voltage at the same time, thus the Current I must therefore be: Current I = Voltage V / Resistance R, and thus Power from the Source, we are Pumping Current.

 

Note: The HP 211A Square Wave Generator in the background!

 

After this is done, the Frequency can be adjusted to find the optimum sweet spot, and if desired, a Capacitor can be employed to run the POC at a specific Frequency! The Output in Theory should be completely reactive, but experiment just may surprise you!

 

In the original POC Diagram, we have the Simplest Form, this is where no one else can say this is where you start from and this Experiment Proves beyond any doubt Asymmetrical Electromagnetic Induction - This was a critical step, without this step, we would have no basis in science proving the Theory, and no experiment that would follow, would be quite so decisive and Theory changing.

Anyone that's done the experiment and done them correctly can see Asymmetrical Electromagnetic Induction working on the bench! This is Proof and it's the Critical First Step in understanding why Symmetry must be Broken! AKA Asymmetry in Electromagnetics for the first time in Human History!

IMPORTANT: It is critical to current limit the Input, do not over drive your machine, all you need is the Voltage, the POC MUST do all the Work here!

Note: I have found, when you make a change to a YouTube Video, if it is a major change, the Date its uploaded is altered. 

Best Wishes,

   Chris

  • Liked by
  • FringeIdeas
  • Drasko
We're Light Years Ahead!
Members Online:

No one online at the moment


Past Visitors: 0 | Live Visitors: 0


3D globe widget by: Chris Sykes

What is a Scalar:

In physics, scalars are physical quantities that are unaffected by changes to a vector space basis. Scalars are often accompanied by units of measurement, as in "10 cm". Examples of scalar quantities are mass, distance, charge, volume, time, speed, and the magnitude of physical vectors in general.

You need to forget the Non-Sense that some spout with out knowing the actual Definition of the word Scalar! Some people talk absolute Bull Sh*t!

The pressure P in the formula P = pgh, pgh is a scalar that tells you the amount of this squashing force per unit area in a fluid.

A Scalar, having both direction and magnitude, can be anything! The Magnetic Field, a Charge moving, yet some Numb Nuts think it means Magic Science!

Message from God:

Hello my children. This is Yahweh, the one true Lord. You have found creation's secret. Now share it peacefully with the world.

Ref: Message from God written inside the Human Genome

God be in my head, and in my thinking.

God be in my eyes, and in my looking.

God be in my mouth, and in my speaking.

Oh, God be in my heart, and in my understanding.

We love and trust in our Lord, Jesus Christ of Nazareth!

Your Support:

More than anything else, your contributions to this forum are most important! We are trying to actively get all visitors involved, but we do only have a few main contributors, which are very much appreciated! If you would like to see more pages with more detailed experiments and answers, perhaps a contribution of another type maybe possible:

PayPal De-Platformed me!

They REFUSE to tell me why!

We now use Wise!

Donate
Use E-Mail: Chris at aboveunity.com

The content I am sharing is not only unique, but is changing the world as we know it! Please Support Us!

Thank You So Much!

Weeks High Earners:
The great Nikola Tesla:
N. Tesla

Ere many generations pass, our machinery will be driven by a power obtainable at any point of the universe. This idea is not novel. Men have been led to it long ago by instinct or reason. It has been expressed in many ways, and in many places, in the history of old and new. We find it in the delightful myth of Antheus, who drives power from the earth; we find it among the subtle speculations of one of your splendid mathematicians, and in many hints and statements of thinkers of the present time. Throughout space there is energy. Is this energy static or kinetic? If static, our hopes are in vain; if kinetic - and this we know it is for certain - then it is a mere question of time when men will succeed in attaching their machinery to the very wheelwork of nature.

Experiments With Alternate Currents Of High Potential And High Frequency (February 1892).

Close