Ask yourself why many have failed to recreate the installation with an increase in output power? Whatever you do, grenades, kachers, Tesla, etc. A lot of schemes and stories in forums and YouTubes will never give anything.
You need to think in volume, look at the Kapanadze generators, does he use the complex circuits that we collected? Of course not. There is an inverter of 220 volts, there is a high-voltage transformer with a voltage of no more than 1 kV, and that's all.
What gives us power? Is that the current in the circuit right? So. And now turn on the logic of how he does it and the same installation that was demonstrated in Baku. There is a voltage of 270 volts sine modified 50 hertz. There is a coil to which it is fed, and there is a spark gap. There is high voltage. Further, the arrester is set to 25 hertz and clicks on 0 when a positive sinusoid occurs, in this case a meander. Well, that's all.
Hello everyone on the forum. Now I'll tell you everything. Yes, the circuit is almost correct, in no case should you use the output to the diode bridge from a copper tube with a cut, there should be a capacitance between the tube and the winding, it will be 20 + 20 turns of wire wound in antiphase and the central wire should be connected to the diode bridge. The second winding of 18 meters 9 + 9 is also in antiphase, and only the third 30 meters is wound in two bifilar wires to obtain inductance and the effect of the discharge on both coils.
Greetings to you all, why is the topic swollen? Just need a little respect for each other and everything will be fine.
Many of the people who conduct or have conducted experiments want to immediately see the output above unity, without creating the conditions for it.
For example, we have a car weighing 1 ton, which needs to be moved, for example, at a speed of 100 km per hour.
The car is our load, which we take as a basis.
There is an elephant that can move at a speed of 10 km per hour, this is a current.
There is a cheetah that can run at a speed of 100 km per hour - this is our stress.
If conditions are not created, then the elephant will push the car at a speed of 10 km per hour, no matter how hard the cheetah pushes it, while having speed.
Whatever you do, if you do not create conditions in the conductor in such a way that the current and voltages add up, power will not be possible to obtain.
But how to get it? How many times I tried to convey to you, you never saw the essence. Although one of the publications outlined a clear principle of operation of the generator. It was only necessary to put a capacitor with a capacity of 0.4 microfarads and the issue was closed.
Whoever guessed what was at stake, he understood where the secret of the device was hidden. In order for your current to start moving with high voltage in a conductor with low resistance, you, using TVS or TT Kacher, begin to increase the resistance in the conductor, creating phase addition conditions.
Now I'm collecting at 1 kilowatt, and maybe the power will come out higher. The voltage that the kacher gives out on the receiving removable coil is above 250 volts. The buildup current of the circuit is 2 Amperes, yesterday you assembled a low-frequency high-voltage coil, this is so that the current in the circuit can increase. Now I'm collecting at 1 kilowatt, and maybe the power will come out higher. The voltage that the kacher gives out on the receiving removable coil is above 250 volts. The buildup current of the circuit is 2 Amperes, yesterday you assembled a low-frequency high-voltage coil, this is so that the current in the circuit can increase.
On the receiving coil you get truss voltages of about 250 volts. But already she has the usual tension. Its essence is a decoupling between magnetic fields so that the first coil affects the second and the second does not affect the first in any way. The cap patent clearly shows this
There is cc, there is a receiving coil. One part of the reception sits on the ground, the output is loaded with a lamp. From the second century I already apply a discharge to obtain current
Well, sorry, if you can’t get it, it doesn’t mean that it doesn’t work at all.
The specialists who tested the device saw it with their own eyes, held it in their hands and practically informed everyone inside whether there were hidden batteries. It was turned on for several hours, and charged a laptop beech and a couple of phones. After the test, they also asked questions, but where did the increase come from?
I actually have the unit in stock right now in working order. Even if someone wants to come to see with their own eyes, to feel it, check it out, but for God's sake.
Yes, you don’t think what will happen, you came to see it, and then it somehow miraculously stopped working. It will still work and give energy.
Of course, I don’t need gifts from you, I myself will make gifts for you so that you can make sure that there is a working device, but then after the show, I won’t give a diagram if you think that I will draw and show on a piece of paper.
Without land, it is unlikely to work, because without it there is no potential and gain. Unless you hook onto the car body. Or on a large metal sheet. Then yes, you can do without land. And so everything will start to bite, and one more thing, but the metal sheet itself will also start to bite if you touch it. Best grounding.
And look, here you have voltage potential right? You got 250 volts on the secondary circuit, now you need to increase the current in it. The same primary processing must work with the second oscillator and the voltage of the second oscillator must be at least 5 kilovolts. Everything must be galvanically isolated. Capacitor Capacitor Capacitor again Capacitor.
Nothing ever happens with a grounding pin, especially with an ordinary kacher or TT, this is a myth of those who deceive and deceive, like a novel, etc. Mystical frequencies and hydrogens, the earth does not work here, but transferred somewhere and suddenly does not work.
A regular pin to the ground and will work for many years without problems.
The general principle of adding additional power is the addition of current with voltage.
1) the principle and it is the foundation of this installation, it is necessary to separate the influence of the first circuit of the high-voltage generator from the second circuit of the low-frequency generator
2) there are 2 coils in total and this is completely enough, the first coil is the operating voltage from the VV, and the second is the output load coil. We must apply both BB and LF to the first one.
But at the same time, the generators themselves do not affect each other in any way and should not influence
3) it really should be the earth, it doesn’t work without it, but it just starts flashing everywhere to bite BB.
4) current and voltage the principle of addition
A) on the circuit of the removal of cv we get voltages
B) the circuit is the same LF we get the current in phase
Now according to the scheme.
You can assemble on a ferm rod with any generator for 200-250 kilohertz (I'm assembling it myself at the moment)
One end is soldered to a matching capacitor, the second is planted on the ground through a removable coil
On the circuit + on the ground and minus is connected to the first end of the generator BB