I do all THIS for YOU!

  • 601 Views
  • Last Post 09 November 2022
Chris posted this 26 October 2022

My Friends,

Each Post, each thread, each Experiment I share: Its all for you!

I do all this for YOU!

 

I want YOU to be the next level, better than Yesterday, person, with Information available to you right now! If you only learn and take note of this Very Important information! The Numpty Club has NO IDEA what so ever! They are blatantly Wrong!

There are VERY Bad Times ahead, I hope you know this!

Approximately 8% of Members here have succeeded well Above Unity! Do you want to be part of this Group?

Best Wishes,

   Chris

Order By: Standard | Newest | Votes
skywatcher posted this 27 October 2022

Hi Chris,

 

i joined this forum some 2 or 3 years ago but because of some personal issues i was not able to invest much time, so after some weeks of following all the posts and doing some initial experiments i was more or less absent for the rest of the time.

 

I know, you don't like it when people are coming into this forum, and 'demanding' something. You say that everyone has to start from zero and learn all the basics, until enough knowledge has been gained to build a working device. (when i say 'working' i mean: overunity, self-running).

 

On one hand i can fully understand this, but on the other hand i think that it is not efficient if some people already have succeeded in building working devices, and others have to start from zero. It would be much more efficient to use the best performing device as a sample, and publish a detailed description which allows (almost) everyone to replicate it, even without knowing every detail how it works. At least for me (and i think this is also the case for many others) it's easier to understand how something works if i have a working device, and can examine it, and play around with it.

 

Maybe you have already seen it, if not i highly recommend this video:

In this video, Dr. Greer describes what errors are always made by people who have invented 'free energy' devices.

Disclosure needs to happen on a BIG scale, not only to some 'insider' people who have advanced knowledge.

 

My experience always was, that it takes much time and a huge effort to get something running the first time. Once you have done it, you can do it again, and improve it much easier. The best way to learn something is to look at a working example, then understand it, play with it, and finally improve it. Nobody who wants to program in C needs to write a C compiler himself. It's sufficient if someone else has done it, and you use it. Even if you want to make a better one, you don't need to start from scratch.

 

When browsing through the forum i saw that there are several devices marked as 'above unity' but for some of them there is not even a basic description, or you have to read through hundrets of posts etc.  I know it takes a lot of effort to write a good documentation and i'm also not doing this normally, but if i would have a self-running device, i would for sure do it.

 

I have seen so much fakes, and non-working stuff in the last 20 years, that my threshold to 'beleive' something has reached a very high level... if you understand what i mean. I have invested so much time and also money for nothing. But if i would really see something which convinces me that there is a real chance to successfully replicate it, i would invest so much time and money until it would be successful.

 

Now my post has become longer than it was intended. My intention was not to annoy you. πŸ˜‡

Melendor posted this 27 October 2022

Hey Skywatcher , Chris  and Team.

@Sky...I am glad that you are back man. Thank you for posting this and  ""Original Skywatcher experiment "
I know you since like 20 years .Glad that you are in good health.

I just that this conversion does not go to wild , as you are a good member of Free energy forums , and I know you are not a troll.

About some extra info , about how to do things..I think that Chris has posted 3 weeks ago that He will show us something,an experiment.I know he will,but am sure he has a lot to deal with in his private life also.
I think that you missed that post.

This all situation is very complicated,because every device has 1% hidden stuff in it.
99% you can replicate it , but without that 1% trick...it is useless.

Example :

Fighter ZPM. , I have replicated it around 5 times.(failed all 5 times )  It is very easy to replicate :

2 coils ,  CW - CCW and a bulb in Parallel with the 2. ( 1 bucking coil is the trigger coil also )
Does it work ? NO it doesn't...not without that 1% of secret trick.
The ability to power a Car 25 W bulb with 25 V  0.01 A  , if that is not OU, I do not know what is.

I am sure that Chris will show us some basic demonstration when he has the time.

I am old and I think I will die in the next 5 years , but if there is a chance to lean,and teach my grandchildren so they can teach theirs and so on....I will take the opportunity.

We must stay together , and not fight one another.
We will do it !
~~~ Melendor the Wizard

skywatcher posted this 27 October 2022

I'm not 'Original Skywatcher'... but i'm also sometimes active in overunity.com forum.

 

Yes, i know, sometimes it can be complicated to replicate something, because not even the inventor knows which little details are important. My problem always is: how much time i want to invest before giving up ?  Will it work after 1 month, after 1 year, or will it not even work after 10 years ?  If i would see something in the real world, without the slightest doubt about the functionality, then i would invest whatever it takes to replicate it. But not based on youtube videos from anonymous people.

 

One example: one of my colleagues wanted to build a proton magnetometer. Just for fun. The first attempts failed. He was not able to detect the precession frequency. But because he knew as a fact that other people had successfully built such devices, he continued until he also got it working. But without knowing this, he would have given up too early maybe.

 

So it always is a matter of trust. I think here in this forum the probability of fakes is much lower than somewhere else, so i would be more inclined to beleive what i see here.

  • Liked by
  • Chris
  • Augenblick
Melendor posted this 27 October 2022

I'm not 'Original Skywatcher'... but i'm also sometimes active in overunity.com forum.

Ouch, so you are another Skywatcher not the Original one.
This can create some confusion in the future. Perhaps a better approach would be to change your name  , if you know that the OLD Skywatcher is taken.

Chris will show us a working device when he thinks that time has come to do that.
I trust him and I trust the process.

What I would suggest , is that you go on with your life ( go to work , drive the car, get married , children etc ) , and the research do it when you have time.
In this case,you will not get dissapointed if 20 years are gone and you do not have results.
This is the system I use.
I try to be happy and enjoy life....If I succed in an OU device,good ....if not...also good.

PS: I have seen a Skywatcher in the gang that tried to take the Forum Data from Chris.
You must understand that if you are that Skywatcher, you can not play on both sides...there and here.

Thank you.
~~~ Melendor the Wizard

 

ansen posted this 28 October 2022

On one hand i can fully understand this, but on the other hand i think that it is not efficient if some people already have succeeded in building working devices, and others have to start from zero. It would be much more efficient to use the best performing device as a sample, and publish a detailed description which allows (almost) everyone to replicate it, even without knowing every detail how it works.

I somewhat agree with this. Sure, in a lot of cases it is good and very important to start from zero and really understand how things work. The problem is, we need to get this stuff out to a lot of people, we don't have all the time in the world, and imo there are not enough people that are capable and/or willing to start from scratch. Also we can't really build hundreds and thousands of devices for others ourselves. I don't want to be negative, but that's how it seems to be.

Having a PDF or something that provides step by step plans to build an aboveunity device would be nice, but then there'd probably be a ton of trolls getting their hands on it, maybe change it a bit, and market it as their own "invention". The good thing is, we do have an excellent explanation and example to get started in Chris' series of videos "Non-Inductive Coil Experiment". It takes a while to go through it all, but it's a ton of information to help people get started. Thank you so much Chris for putting in all that effort for us!

  • Liked by
  • Augenblick
Chris posted this 28 October 2022

Hi Skywatcher and Melendor,

In the days when Akula was showing video after video of self running machines, not a single person could replicate them, at all!

100's of Videos, some of which I saved and uploaded again here: Akula Vids, one such Video:

 

It looks simple enough, right? Simple enough that anyone could build it right?

No was the answer, not a single person was able to achieve a replication! 

Well, today, the tables have turned, we have many, MANY replications! Some are very far ahead:

My first post in a long time.

COP = 20 in a different but not too far removed configuration. And no im not going to post it, just to ratify the effect is real. (measurements verified by scientific report) and loopback self running. Trust in Jagu and Chris and all the information Chris has provided. 2000% the truth.

 

PS:

Put black tape over your psu meters. Use an integrating power meter with high sampling rate rate for the input power. Alternatively, use oscilloscope and use the calculation I will post in a separate thread tomorrow which is a simple verified equivalent.  OU is being hidden in measurement errors.

Ref: Aetherholic

 

Aetherholic then went on to post the following thread, showing Data: Aetherholic's COP>4.0

So I get what you're saying, but the problem is, No One can achieve anything going in Blindly to one of the most important tasks of their Life! There is just no other way! The average person that really wants to succeed, can only succeed with the right Knowledge First! There is no other way!

A symphony can not be created with an Armature Orchestra! 

Follow the Above-Unity Tag and you will see just how much success we have had, some of which is not listed there, as some wish to stay private for their own safety!

Yes, soon I have a project coming out that will show you everything that the Researchers and Studiers will understand! However, for those that do not have the base knowledge, we here at Aboveunity.com have provided, will not understand and simply fail in Replication just as everyone did when Akula was releasing Video after Video after Video... You get the idea!

Thing is, Skywatcher, here, we will help all giving it a good go! We will support you in your effort! We will provide all the community support for all working to make their machines work!

This is actually Very easy! But only once one has the knowledge! Ask any here, that have succeeded, they will tell you the same! But one must have the base knowledge to start with!

Again, we will help if you decide to put a Genuine Effort and Hard Work! It takes a little bit to grasp!

There are two mistakes along the way to Mastery: Not Starting and and not going all the way!

Cite: Master Shi Heng Yi

 

@Melendor, post your project and we will help! There is a few little tricks to this, nothing that cant be picked up as we did when we worked on it.

Best Wishes,

   Chris

skywatcher posted this 28 October 2022

@Melendor:

Actually i was the first 'Skywatcher' here (otherwise the name would have already been taken) and this is the name i'm using most of the time in the online world. I don't know why 'Original Skywatcher' took this name. Anyway, i also would have no problem to change my name here, if Chris wants me to do this.

 

@Chris:

I also tried to replicate some of the Akula Devices. After failing some times, and also seeing no other successful replications anywhere, i concluded that it most likely was fake.

 

But i think it CAN be possible to replicate such devices without knowing exactly how they work. This must be our goal anyway because mass producing such devices for the general public is exactly that. Or do you think the guys who are assembling computers or mobile phones know every detail how they work ?  The problem with the Akula devices (and many others) is that there is NO exact description for them. No 'bill of materials'. No exact circuit diagram. No PCB layout. No description how to wind the coils, how many turns, which wire, which type of ferrite core... nothing. Of course only parts should be used which are available everywhere in the world. Not some unknown ferrite core from the junk yard, without knowing the characteristics.

 

For example the 'Aetherholic device'. I would be interested to replicate it. But i found NOTHING. No picture, no video, nothing. Only a claim that it's overunity, and some scope shots and calculations. The same applies (more or less) for all the other devices here.

 

Of course i also want to learn about all the details, how they work. But this would be much easier by looking at a working example.

 

If everyone is required to start from zero, there will only be very few people who will benefit from all this, and they will take their knowledge to their graves some time, and the knowledge is lost again, This is not what we want. We want to bring the technology out to the public, right ?  So that everyone can benefit from it.

  • Liked by
  • Augenblick
  • strape
skywatcher posted this 28 October 2022

Please forgive me if someone feels offended by my posts. This is not my intention. Sometimes my style of communication is a little bit too straightforward. πŸ™‚πŸ˜Š

  • Liked by
  • Augenblick
  • strape
Chris posted this 28 October 2022

Hi Skywatcher,

Your Statement:

I also tried to replicate some of the Akula Devices. After failing some times, and also seeing no other successful replications anywhere, i concluded that it most likely was fake.

 

No, they were REAL, not fake! They worked just as Akula showed!

FYI, I was contacted by Steho Energy AG the very same company Akula was hired by, and persuaded into signing NDA's and so on!

Ref: Here

 

Your statement:

But i think it CAN be possible to replicate such devices without knowing exactly how they work. This must be our goal anyway because mass producing such devices for the general public is exactly that. Or do you think the guys who are assembling computers or mobile phones know every detail how they work ?

 

I disagree whole heartedly! 

Building anything requires complete understanding if one wants to build with any predictable accuracy!

Our old mate Dave Jones from EEV Blog gives a tiny bit of an idea:

 

Full and Complete Understanding is a Specific Requirement to achieve anything with Accuracy! No one ever built a Computer with a roll of Duck Tape and Sand Paper! Not a Computer that Works, anyway!

Your Statement:

If everyone is required to start from zero, there will only be very few people who will benefit from all this, and they will take their knowledge to their graves some time, and the knowledge is lost again, This is not what we want. We want to bring the technology out to the public, right ?

 

I am not sure you understand what we have already achieved? I am not sure you have read any of the pages/threads here, which you stated you had not been here for some time... 

As it stands, we have a pretty long Public List of successes:

 

Perhaps you may want to re-access your Statements and your position with some deep reflection before making any more statements that really dont reside in the realm of common-sense?

Best Wishes,

   Chris

skywatcher posted this 28 October 2022

Ok, i see it will not work like i hoped it would work. This is sad, but i have to accept it.

As we are running out of time, i hoped there could be some acceleration...

 

So i will do the following:

 

I will read again every thread which was posted in the last 2 years, and try to extract as much useful infos as possible. Then i will start my own thread where i will post what i'm doing, and hopefully i will get some hints which will be helpful. I have a high-end scope, function generator, 3D printer etc. so from this side thete should not be any problem.

 

My goal is to build a self-running device which does not need any external power source to run. As soon as i have this, i will document everything so that anyone who has some basic skills in electronics can successfully replicate it. This is absolutely crucial if we want to roll out the technology to the general public. I don't see any reason why this should not be possible. If you specify exactly every part, and how to put them together, it has to work. If it doesn't work it's not a good design or the description is not good enough, and has to be improved further. Every 10 year old can build a simple AM radio in some hours without knowing exactly how it works. Why should this not possible with a free energy device ?

Chris posted this 28 October 2022

Hello Skywatcher, 

With Respect, those people that are Putting in the Hard Work, and Studied / Researched, as I have, are not Running Out of Time!

The only people running out of time are the people that refuse to put the hard work in and do the study!

The knowledge is already in My Pages! Its already Documented! Its been documented for many Years now!

It actually makes me somewhat aggravated that people expect some sort of Miracle, because they think they are special, or something, like they want me to pull a Magic Wand out of my Rear End and wave it over them! Just so they can have what they want!

WTF!!!

Akula was highly Trained in Electrical Engineering in the Military, as I believe, he was repairing TV's and Radios for his friends and family from a very young age! Very simple: He knew what he was doing!

Come 2024, around December, there is going to be a massive Catastrophe and those that are not prepared will have Zero Chance! Those prepared will at least have some chance!

 

Ok, i see it will not work like i hoped it would work.

 

Now, to be honest, if you keep on at me, on this track, I will simply Ban You for Trolling My Forum! I am very tired of this Special Treatment Attitude that so many people seem to have these days! This is your Last Warning!

I have already given you this: 

 Start Here → Builders Guide to Aboveunity Machines

 

Which stares everyone in the face on the Home Page! It is up to you how you proceed?

Best Wishes,

   Chris

  • Liked by
  • Augenblick
748u7 posted this 09 November 2022

"Come 2024, around December, there is going to be a massive Catastrophe and those that are not prepared will have Zero Chance! Those prepared will at least have some chance!"

Hey Chris,

I've been reading various threads and just trying to absorb as much useful info as I can before I go and buy components.

I realize this is a bit off topic so I apologize, please feel free to move this question somewhere else if there is a better place for it.

Would you care to elaborate as much as you feel comfortable doing so regarding your statement above about massive Catastrophe.

I keep track of various premonitions and the different dates people are following as I think there is something to be said about shared realities and timelines between different groups of people.

Are you expecting a CME of sorts? Or were you referring more to a total collapse of society, energy/food distribution.

I am fully expecting the societal problems to hit in the next year and a half, but I had the CME pegged for 2033-2044 based on various sources. if you were referring to a CME yours is the earliest estimate I've seen. All the other people I follow who have estimates in this regard are channeling it.

For example one person I follow quoted the following in this video.

?t=12470

"

3:27:21 Steve@ChatReplay: ​LOL, the real reason we burned fossil fuels is to preburn the oil so it doesn't all catch fire at once during the solar micro nova (estimated 2048). better to burn it in advance. 

3:27:50 MFMP: so uh steve wetstown uh is saying there's going to be a problem around 2048 i think it's uh my premonition is around about 2033 to 2036. uh and i but i think that if we uh learn how to use this technology uh responsibly uh we can mitigate the the biggest problems.

"

  • Liked by
  • Chris
  • Augenblick
We're Light Years Ahead!
Our Above Unity Machines:

Asymmetrical EMI

Wistiti's Bucking Joule Thief
Non-Inductive Coil Experiment
CD's Non-Inductive Coil Rep
Baerndorfer's Experiment
Captainloz's A-R-E
Aetherholic's COP>4.0

Resonant EMI

Yo's Ferro Resonance
Jagau's Non-linear Resonance
Ferrite at work
Recomended Protocol:
Measurement
Switching System
Measurement Block
Current Observation
Current Sensing Resolution
Members Online:

No one online at the moment

What is a Scalar:

In physics, scalars are physical quantities that are unaffected by changes to a vector space basis. Scalars are often accompanied by units of measurement, as in "10 cm". Examples of scalar quantities are mass, distance, charge, volume, time, speed, and the magnitude of physical vectors in general.

You need to forget the Non-Sense that some spout with out knowing the actual Definition of the word Scalar! Some people talk absolute Bull Sh*t!

The pressure P in the formula P = pgh, pgh is a scalar that tells you the amount of this squashing force per unit area in a fluid.

A Scalar, having both direction and magnitude, can be anything! The Magnetic Field, a Charge moving, yet some Numb Nuts think it means Magic Science!

Start Here:
Help with using the Forum.
Message from God:

Hello my children. This is Yahweh, the one true Lord. You have found creation's secret. Now share it peacefully with the world.

Ref: Message from God written inside the Human Genome

God be in my head, and in my thinking.

God be in my eyes, and in my looking.

God be in my mouth, and in my speaking.

Oh, God be in my heart, and in my understanding.

Your Support:

More than anything else, your contributions to this forum are most important! We are trying to actively get all visitors involved, but we do only have a few main contributors, which are very much appreciated! If you would like to see more pages with more detailed experiments and answers, perhaps a contribution of another type maybe possible:

PayPal De-Platformed me!

They REFUSE to tell me why!

We now use Wise!

Donate
Use E-Mail: Chris at aboveunity.com

The content I am sharing is not only unique, but is changing the world as we know it! Please Support Us!

Thank You So Much!

Browse by Category:
Weeks High Earners:
The great Nikola Tesla:

Ere many generations pass, our machinery will be driven by a power obtainable at any point of the universe. This idea is not novel. Men have been led to it long ago by instinct or reason. It has been expressed in many ways, and in many places, in the history of old and new. We find it in the delightful myth of Antheus, who drives power from the earth; we find it among the subtle speculations of one of your splendid mathematicians, and in many hints and statements of thinkers of the present time. Throughout space there is energy. Is this energy static or kinetic? If static, our hopes are in vain; if kinetic - and this we know it is for certain - then it is a mere question of time when men will succeed in attaching their machinery to the very wheelwork of nature.

Experiments With Alternate Currents Of High Potential And High Frequency (February 1892).

Close